LegacyNsfw / EcuHacksLinks
Tinkering with the ECU code in my 2005 Subaru Legacy GT
☆22Updated 5 years ago
Alternatives and similar repositories for EcuHacks
Users that are interested in EcuHacks are comparing it to the libraries listed below
Sorting:
- Unlocking the Cruze, one byte at a time.☆15Updated 3 years ago
- Bosch ME7.3H4 RomTool for Ferrari 360's☆37Updated 7 years ago
- Windows code for J2534 Arduino☆27Updated 5 years ago
- SharpTune☆30Updated 4 years ago
- ☆15Updated 7 years ago
- This utility searches windows registry for installed j2534 library's , Tool info, and supported communication protocols.☆20Updated 6 months ago
- Arduino project to readout Automatic Transmission Fluid Temp and write to FIS display☆26Updated 2 years ago
- Tools for disassembling and analyzing ECUs☆19Updated 13 years ago
- J2534 Simulator for 0202 and 0404☆21Updated 7 years ago
- Adaptronic Select ECU Tuning Aid☆28Updated 10 years ago
- Modified version of PCM Hammer. Used to program calibration and OS or just the calibration section of 03-06 and 07 classic GMT800 instrum…☆29Updated 6 months ago
- Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)☆39Updated 7 years ago
- Nodejs SAE J2534 Api☆12Updated 5 years ago
- ☆22Updated 9 years ago
- Siemens Bosch ME7.x Disassembler Helper for IDA Pro☆16Updated 10 years ago
- FastECU tuning/logging/flashing software for OEM ECUs☆63Updated 5 months ago
- Fulcrum is the ultimate J2534 DLL Shim written in C++ which is able to pipe data out from the native calls to any other location for supe…☆35Updated 8 months ago
- Car ECU logs processing: MAF scaling/rescaling, Table rescaling, Throttle Maps, Load / Injector Pulse Width / IAT compensation, Speed Den…☆79Updated 2 years ago
- Automotive tuning tool☆87Updated last week
- BSD Licensed tool written in C for management of Bosch ME7.x firmwares, config files are specifically targeted at Ferrari 360 in current …☆20Updated 3 years ago
- BSD Licensed tool written in C for Bosch ME7.x EEPROM data dump checksum validations. Specifically validates dump files for 95040 IC 512b…☆12Updated 12 years ago
- Decode blocks out of a Bosch MED17 ECU internal flash / EEPROM dump☆20Updated 6 years ago
- nisprog Nissan ECU reflashing tool☆97Updated last year
- Understand and run units via CAN-bus network☆17Updated 4 years ago
- Tool for plotting ME7 (VCDS, ECUx, ME7L) logs☆53Updated this week
- Arduino firmware for Sardine CAN (Open Source J2534 device)☆85Updated 10 years ago
- Open Source CanBUS J2534 Honda/Acura Reflash Tool (Work in Progress)☆64Updated 3 years ago
- IDA Pro Bosch ME7x C16x Disassembler Helper☆45Updated 2 years ago
- GUI for the Bosch ME7.X checksum check and correction CL utilities☆19Updated 3 years ago
- Utility to read Ram of a MED9.1 ECU☆16Updated last year