Alternatives and similar repositories for console-decoders:

Users that are interested in console-decoders are comparing it to the libraries listed below

• helium / longfi-arduino
  ☆63Updated 3 years ago
• arkieguy / RAK4631-Helium-Mapper
  Example code for a LPWAN tracker based on the RAK WisBlock products
  ☆16Updated 3 years ago
• helium / longfi-platformio
  ☆16Updated 8 months ago
• helium / sx1302_hal
  SX1302 Hardware Abstraction Layer and Tools (packet forwarder...)
  ☆40Updated last year
• tmiklas / tbeam-helium-mapper
  ☆15Updated 2 years ago
• takeabyte / helium_mapper_grafana
  Customisation for Helium Mapper to upload to Mqtt > Nodered > influx > grafana
  ☆12Updated 2 years ago
• jthiller / CubeCell-Helium-vindriktning-particle-sensor
  Helium LoRaWAN data reporting via a Heltec Cubecell for the Ikea VINDRIKTNING PM2.5 air quality sensor
  ☆27Updated 2 years ago
• helium / gateway-config
  The Helium configuration application. Enables configuring the Helium Hotspot over Bluetooth
  ☆39Updated 2 years ago
• RAKWireless / RAK2245_for_helium
  RAK2245 for helium
  ☆21Updated 4 years ago
• Seeed-Solution / TTN-Payload-Decoder
  ☆23Updated last year
• disk91 / helium-chirpstack-community
  Glue between helium and chirpstack
  ☆21Updated last month
• disk91 / WioLoRaWANFieldTester
  ☆89Updated 10 months ago
• Carniverous19 / helium-DIY-middleman
  Code here acts as a middleman between LoRa gateways running Semtech packet forwarders and servers ingesting packet forwarder data
  ☆37Updated 2 years ago
• JasonRJ / RAK7200_Helium_Mapper
  RAK7200 Helium Mapper - S76G SiP (STM32l073RX, SX1276, CXD5603GF)
  ☆11Updated 4 years ago
• just4give / helium-dyi-hotspot-balena-pi4
  ☆84Updated last year
• RAKWireless / RUI_LoRa_node_payload_decoder
  This decoder can be used for all LoRa nodes which are built based on RUI.
  ☆28Updated 4 years ago
• chirpstack / chirpstack-packet-multiplexer
  Forward Semtech packet-forwarder data to multiple servers.
  ☆73Updated 3 months ago
• helium / virtual-lorawan-device
  A utility that attaches to a Semtech UDP Host and pretends to be a LoRaWAN Device
  ☆26Updated 7 months ago
• helium / gateway-mfr-rs
  ☆19Updated last year
• ttnmapper / documentation
  Documentation on the working of TTN Mapper.
  ☆22Updated last year
• dragino / Arduino-Profile-Examples
  Example for Dragino LoRa Devices.
  ☆85Updated 5 years ago
• beegee-tokyo / WisBlock-API
  WisBlock API takes care of all the LoRaWAN, BLE, AT command functionality. It makes development of event driven power savings application…
  ☆32Updated last year
• Max-Plastix / tbeam-helium-mapper
  ☆61Updated last year
• helium / lora_gateway
  Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.
  ☆12Updated last year
• TheThingsNetwork / lorawan-devices
  Device Repository for LoRaWAN devices
  ☆210Updated this week
• jas-williams / CubeCell-Helium-Mapper
  ☆48Updated 2 years ago
• beegee-tokyo / RAK4631-LoRa-BLE-Config
  Example how to configure LORa/LoRaWAN of a WisBlock Core RAK4631 over BLE
  ☆17Updated 4 years ago
• RAKWireless / rakwireless-docs
  Open-source documentation center of RAKwireless. The RAK Documentation Center aims to assist every developer, entrepreneur, and enthusias…
  ☆40Updated last month
• NebraLtd / helium-miner-software
  Software for Nebra (and third party) Helium Miners
  ☆95Updated 4 months ago
• Carniverous19 / helium_analysis_tools
  various tools for analyzing hotspot or PoC activity
  ☆50Updated 2 years ago