gryzli133 / RollerShutterSplitLinks
Roller Shutter code - multiple Files
☆22Updated last week
Alternatives and similar repositories for RollerShutterSplit
Users that are interested in RollerShutterSplit are comparing it to the libraries listed below
Sorting:
- ESPHome Modbus Server component☆45Updated 2 years ago
- Arduino sketch to handle relays, primarily lights☆34Updated 3 years ago
- A simple Modbus RTU to Modbus TCP Bridge that is done with off-the shelf parts utilizing the ESP-8266☆17Updated 2 years ago
- ESP32 based ethernet I/O board for home automation☆65Updated 2 years ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆110Updated 4 years ago
- Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)☆157Updated last year
- Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU☆57Updated 3 years ago
- PCB☆62Updated 3 years ago
- An ESP32 based 8 channels motor controller (to replace Homematic IP Floor Heating Actuator)☆106Updated 3 months ago
- ESP32 OpenTherm Wi-Fi Thermostat☆58Updated last year
- Easy to use ESP32-C6 Zigbee Router Light Bulb example☆39Updated 3 months ago
- ESP8266 gateway between RFLink and MQTT server☆102Updated 3 years ago
- All my ESPhome yam file☆13Updated this week
- A barebones ESPHomeLib MySensors Gateway Shim☆10Updated 5 years ago
- DIY project to build a smart fuel sensor for RVs or in other projects. It is based on air pressure and is able to measure fresh water as …☆15Updated 2 years ago
- Arduino library to control non-smart roller shutters using time☆61Updated 5 years ago
- Readout of EMS protocol datagrams and transfer of data to Domoticz via Arduino☆90Updated 4 years ago
- reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)☆258Updated last year
- Growatt Inverter monitoring via MQTT using ESP8266 modbus interface☆67Updated 5 years ago
- ☆102Updated last year
- ☆38Updated last year
- RFLink for ESP, with MQTT client☆75Updated 2 years ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆93Updated 3 weeks ago
- ZigBee CC2652P2 Ethernet Coordinator☆33Updated 2 weeks ago
- OpenTherm library to create thermostat for OpenTherm enabled boilers and HVACs using an OpenTherm controller and an ESP32 or other microc…☆71Updated 2 years ago
- Alsavo Heat Pump control application☆11Updated 3 weeks ago
- ESPHome component to monitor and control a ANT-BMS via UART☆64Updated 2 months ago
- ESP-12(E/F) based controller for WLED or other neopixel things☆40Updated last year
- Home Assistant custom component for Pylontech (high voltage) BMS accessed via console☆16Updated 3 months ago
- IOT-Light-Dimmer☆73Updated 5 years ago