epiclabs-uc / esphome-modbus-server
ESPHome Modbus Server component
☆42Updated last year
Alternatives and similar repositories for esphome-modbus-server:
Users that are interested in esphome-modbus-server are comparing it to the libraries listed below
- Measurement of water consumption directly from your water meter with a TCRT5000 like sensor and ESPHome.☆67Updated 2 months ago
- ☆114Updated last year
- An approach for integrating Nextion devices into Home Assistant, using a Python service that allows Nextion Events to send instructions t…☆51Updated 2 years ago
- Create your own smart modulating thermostat using the OpenTherm component for ESPHome☆87Updated 6 months ago
- ESP32 based ethernet I/O board for home automation☆64Updated 2 years ago
- Example of how to control an opentherm boiler with esphome☆168Updated last year
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆109Updated 3 years ago
- This package implements ESPHome components to low-code support Bluetooth Low Eneregy BTHome device standalone reception, and a leverage t…☆59Updated 9 months ago
- ☆26Updated last year
- ESP8266 gateway between RFLink and MQTT server☆97Updated 3 years ago
- This is my NSPanel config, used in collaboration with ESPHome and Home Assistant☆57Updated 3 years ago
- ESPHome Component for Daikin Mini-Splits using the S21 serial port.☆78Updated 7 months ago
- ☆59Updated 3 years ago
- ☆30Updated 3 years ago
- LD2410 mmwave Motion detection in ESPHome for Home Assistant . Can be combined with temperature, humidity and lux sensor☆50Updated last month
- Custom Component for ESPHome enabling Serial over TCP☆42Updated 8 months ago
- ☆62Updated last year
- Key elements of ESPHome YAML Configs☆32Updated 3 years ago
- MQTT control of Airbnk locks.☆31Updated last month
- esphome firmware for esp32_8ch_motor_shield☆50Updated last month
- ESPHome component to monitor a Solax X1 mini via RS485☆39Updated 6 months ago
- Guide to convert arduino code to ESPHome component with inputs controlled by Home Assistant.☆47Updated 3 years ago
- Homekit-based cards for openHASP☆27Updated 11 months ago
- An ESP32 based 8 channels motor controller (to replace Homematic IP Floor Heating Actuator)☆97Updated last month
- Home Assistant custom component for openHASP☆54Updated 5 months ago
- Custom EspHome sensor for reading P1 port on dutch smart meters with ESP module for Home Assistant☆63Updated 2 years ago
- ☆81Updated last week
- Port of OpenTherm protocol to ESPHome.io firmware.☆42Updated 10 months ago
- ☆17Updated last year
- Zigbee Stick based on RF-BM-2652P1/P2 Module from RF-STAR,with CC2652P on board☆85Updated 2 years ago