Alternatives and similar repositories for Templates:

Users that are interested in Templates are comparing it to the libraries listed below

• grblHAL / plugins
  Plugins overview
  ☆25Updated this week
• grblHAL / drivers
  Driver overview
  ☆32Updated this week
• grblHAL / STM32F1xx
  grblHAL driver for ST STM32F1xx (Redpill, Bluepill)
  ☆50Updated this week
• grblHAL / iMXRT1062
  grblHAL driver for NXP iMXRT1062 (Teensy 4.x)
  ☆51Updated this week
• grblHAL / STM32F4xx
  grblHAL driver for ST STM32F4xx (Nucleo-64, Blackpill)
  ☆109Updated this week
• ghent360 / PrntrBoardV2
  32-bit 3D Printer controller board using STM32F407 and replaceable TMC2660/2209 stepper drivers.
  ☆40Updated 3 years ago
• Alfrederson / cncstm32
  CNC Base for Blue Pill
  ☆16Updated 5 years ago
• grblHAL / ESP32
  grblHAL driver for ESP32
  ☆81Updated this week
• scottalford75 / Remora
  Remora is a free, opensource LinuxCNC component and Programmable Realtime Unit (PRU) firmware to allow LPC176x and STM32F4 micro-controll…
  ☆143Updated last month
• dungjk / grbl-stm32
  An open source, embedded, high performance g-code-parser and CNC milling controller. This is a port of GRBL 1.1 to STM32F10X target.
  ☆77Updated 2 years ago
• makerbase-mks / MKS-SERVO57B
  MKS SERVO57B is 3d printer closed loop stepper motor NEMA23 MKS SERVO57 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆21Updated 3 years ago
• grblHAL / Controllers
  List of controllers supported by grblHAL
  ☆40Updated this week
• Stutchbury / Manualmatic-Pendant
  The Manualmatic Pendant for LinuxCNC
  ☆43Updated last month
• Devtronic-US / SmartPendant
  ☆22Updated last month
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆110Updated last year
• Aus3D / RUMBA32
  A powerful 32-bit 3D printer control board.
  ☆70Updated 4 years ago
• bigtreetech / BIGTREETECH-S42B-V1.0
  The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be…
  ☆112Updated 3 years ago
• mgineer85 / 0816-feeder-firmware
  Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.
  ☆34Updated 2 years ago
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆172Updated 3 years ago
• pvico / grbl32
  CNC controller running on the STM32F103 "Blue Pill" board, build and flash on Mac/Linux
  ☆60Updated 3 years ago
• Expatria-Technologies / PicoBOB
  Low-cost and simple GRBLHAL to MACH3 BOB bridge for Raspberry Pi Pico
  ☆26Updated 10 months ago
• zapta / simple_stepper_motor_analyzer
  A DYI stepper motor analyzer. This is a new design that is based on Raspberry Pi Pico and users a compact single PCB design. NOTE: The l…
  ☆149Updated last year
• positron96 / ESP32_CNC_Pendant
  A CNC Pendant on ESP32 board, with LCD, WiFi and SD card
  ☆72Updated 9 months ago
• grblHAL / RP2040
  grblHAL driver for RP2040/RP2350 (Pi Pico, Pi Pico2 etc)
  ☆131Updated this week
• wezhunter / ESP32_LinuxCNC_MotionController_RealTime
  ESP32 hardware based real-time LinuxCNC motion controller
  ☆27Updated 9 months ago
• nickshl / SmartPendant
  SmartPendant - a way to control grblHAL based CNC machine without PC
  ☆39Updated 3 weeks ago
• terjeio / GRBL_MPG_DRO_BoosterPack
  Tiva C BoosterPack for GRBL MPG/DRO
  ☆46Updated last year
• mstrens / grbl_controller_stm32
  Grbl controller running on stm32F103
  ☆35Updated 5 years ago
• mstrens / grbl_6axis_on_stm32
  grbl_6axis_on_stm32
  ☆59Updated 5 years ago
• multigcs / LinuxCNC-RIO
  RealtimeIO for LinuxCNC based on an FPGA
  ☆73Updated 5 months ago