Alternatives and similar repositories for chpc

Users that are interested in chpc are comparing it to the libraries listed below

• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆78Updated last year
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆84Updated 3 months ago
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆109Updated 10 months ago
• NEEY-electronic / JK
  ☆64Updated 2 years ago
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated last year
• daromer2 / InverterOfThings
  ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters
  ☆30Updated 3 years ago
• meteosat007 / solar-pylontech
  How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries
  ☆20Updated 4 years ago
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆172Updated 2 months ago
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆36Updated 2 years ago
• stuartpittaway / diyBMSv4ESP32
  diyBMS v4 code for the ESP32 and new controller hardware
  ☆207Updated last month
• openhp / HeatPumpController
  The Valden Heat Pump controller is a platform to precisely control heat pumps
  ☆138Updated 3 years ago
• kwindrem / RpiDisplaySetup
  Raspberry Pi 7" touchscreen for Venus OS (also HDMI)
  ☆47Updated 3 months ago
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆11Updated 2 months ago
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆70Updated last year
• juamiso / ANT_BMS
  Python Script for raspberry reading BMS Ant parameters via Bluetooth
  ☆41Updated 4 years ago
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆174Updated last month
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆160Updated this week
• chickey / RS485-WiFi-EPEver
  This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…
  ☆73Updated 11 months ago
• OpenEVSE / OpenEVSE_PLUS
  OpenEVSE Hardware
  ☆188Updated 4 months ago
• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆33Updated last year
• dreadnought / python-daly-bms
  Python module for Daly BMS devices
  ☆99Updated last year
• syssi / esphome-virtual-can-bms
  ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus
  ☆16Updated last week
• OpenEVSE / openevse_esp32_firmware
  OpenEVSE V4 WiFi gateway using ESP32
  ☆198Updated 2 weeks ago
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆89Updated last week
• Sleeper85 / esphome-jk-bms-can
  ☆102Updated 8 months ago
• OpenEVSE / open_evse
  Firmware for Open EVSE
  ☆134Updated 6 months ago
• njfaria / SolPipLog
  Logger for the PIP Inverter series ( USB / RS232 version )
  ☆95Updated last year
• sshoecraft / jbdtool
  JBD BMS Linux utility
  ☆64Updated last month
• simat / BatteryMonitor
  Python code to monitor and log battery data
  ☆107Updated last year
• stuartpittaway / diyBMSv4Code
  Software for diyBMS v4
  ☆149Updated 10 months ago