francescosacco / HardwareLibraryLinks
It's an open source Altium database Libraries for Altium Designer.
☆20Updated last year
Alternatives and similar repositories for HardwareLibrary
Users that are interested in HardwareLibrary are comparing it to the libraries listed below
Sorting:
- Libraries used in development of PCBs for the University of Calgary Solar Car Team☆10Updated 5 years ago
- A Dual-Channel, 24-Bit, 256 kS/s Real-Time Hi-Speed USB 2.0 Data Acquisition (DAQ) Device based on STM32H7☆29Updated 2 years ago
- NUCLEO-64 compatible board for the STM32F7 and STM32H7 series☆23Updated 4 years ago
- Open Source CANopen Stack☆60Updated 5 years ago
- Alternative Altium Vault (DBLib)☆26Updated 3 years ago
- This code allows using the ChibiOS HAL with FreeRTOS.☆17Updated 3 years ago
- ☆16Updated 4 years ago
- A Makefile for KiCad 7.0+ projects. It leverages the new `kicad-cli` command included in 7.0 to generate output data for distribution and…☆18Updated last month
- iMX RT 1020 CPU module☆34Updated 5 years ago
- Open-Source Brushless Drive Controller Firmware☆26Updated 11 years ago
- Links to application notes published by electronics manufacturers.☆43Updated 6 years ago
- SEGGER SystemView target sources, configurations, and RTOS patches.☆30Updated 3 years ago
- Examples of common device drivers for different MCUs (STM8, STM32) with separate bare metal hardware abstraction layers.☆20Updated 4 years ago
- DMA-accelerated multi-UART USB CDC for STM32F072 microcontroller☆56Updated 5 years ago
- STM32F407 + Spartan6 combo with high speed USB TMC interface☆28Updated 5 years ago
- GPIB to USB adapter firmware for a Cortex M0 ARM microcontroller☆33Updated 10 years ago
- Vector Network Analyzer 10 KHz - 180 MHz☆25Updated 6 years ago
- Chibios-based ebike controller☆15Updated last month
- ST-Link V2 ITM trace utility☆25Updated 12 years ago
- slcan firmware for the CVRA CAN to USB dongle☆37Updated 4 years ago
- Main Probe Scope PCB Repo☆57Updated 5 years ago
- STM32H7 Arduino form factor and software compatible board☆30Updated 3 years ago
- USB CAN-FD interface based on the STM32G0 that works well with gs_usb on Linux☆26Updated last year
- Firmware, schematic and board drawings for the CANine USBC↔︎CAN adapter☆11Updated last year
- ☆36Updated 7 years ago
- STM32 MCU serial firmware loader (jet another stm32loader fw bootloader tool)☆24Updated 6 years ago
- KiCAD PCBNEW script to generate teardrops☆34Updated 9 years ago
- STM32-H407 and STM32-E407☆30Updated 7 years ago
- Software for the LabTool logic analyzer and oscilloscope☆84Updated 3 years ago
- KiCad plugin to determine the parasitic properties of the printed tracks in the PCB layout.☆35Updated last month