ffcrg / ecpiwwLinks
A wireless EnergyCam Setup with a Raspberry Pi to monitor the energy usage
☆34Updated 9 years ago
Alternatives and similar repositories for ecpiww
Users that are interested in ecpiww are comparing it to the libraries listed below
Sorting:
- An M-bus master that poll a meter and logs data to an MQTT server☆52Updated 9 years ago
- Plugin for a rapid development of battery-powered sensors☆135Updated 3 years ago
- sdm120c ModBus Mini Smart Meter☆72Updated 4 years ago
- A scraper for power devices to feed data to OpenEnergyMonitor☆36Updated 9 months ago
- A KNX/IP library for the ESP8266 with Arduino☆147Updated 4 years ago
- Device to measure energy and temperature☆81Updated 6 years ago
- Alternative Firmware for 'ESP8266, ESP8285 and ESP32 based devices' like Itead Sonoff, Shelly or NodeMCU, with Web, Timers, OTA, MQTT, KN…☆48Updated last year
- OpenThermGateway2MQTT☆10Updated last month
- Scambus is a python based wireless M-Bus scanner and dissector☆31Updated 7 years ago
- Itead Studio SonoffSC custom firmware with MQTT and Domoticz support☆104Updated 6 years ago
- Library for controlling DALI lighting systems☆194Updated last week
- An interface for the Eastron SDM/Modbus smart meter series.☆74Updated 6 years ago
- RFM69 gateway and controller for ESP8266☆44Updated 9 years ago
- Open-source Heatpump Monitor☆78Updated last year
- ESP8266 based logger for GoodWe inverters. Can upload to pvoutput and publishes MQTT topics☆100Updated 2 years ago
- Simple Gui to create simple knxprod file for ETS.☆60Updated 3 years ago
- Allow to turn your Arduino into a self-made KNX device using the hardware TPUART interface☆147Updated 3 years ago
- An Arduino library for the RFM69 transceiver module that enables communications with Davis Instruments weather station hardware.☆95Updated 2 years ago
- Alternative culfw☆127Updated 3 years ago
- Arduino library for home control☆51Updated 9 years ago
- This is the library of the KNX-User-Forum Arduino project initiated by thorsten Gehrig☆58Updated 7 months ago
- JavaScript utilities and examples for using Grafana with openHAB☆47Updated 3 years ago
- The API of Unipi controllers☆103Updated 4 months ago
- Homie based bridge between MQTT and RFlink module☆22Updated 6 years ago
- MQTT 433.92 MHz radio-frequency device gateway☆137Updated 3 years ago
- Control software for Viessmann boiler using Raspberry Pi and USB interface☆18Updated 6 years ago
- Linknx is a service aimed at interacting with KNX devices. It features a value cache to save bus bandwidth and exposes a rules engine all…☆50Updated 5 months ago
- A class to collect data from a energy monitor that uses modbus protocol.☆47Updated 5 years ago
- Software for the ESP8266 that sends P1 smart meter data to Domoticz (with CRC checking)☆83Updated 7 years ago
- nodejs modul with protocol support for different 433mhz switches and weather stations for the RFControl Arduino library.☆48Updated 3 years ago