gituser-rk / orno-modbus-mqtt
Read ORNO OR-WE-514 ModbusRTU energy meter via RS485 serial and publish values to MQTT broker
☆30Updated 5 years ago
Alternatives and similar repositories for orno-modbus-mqtt:
Users that are interested in orno-modbus-mqtt are comparing it to the libraries listed below
- Brings EVSE WB/DIN into your WiFi☆79Updated 2 years ago
- An interface for the Eastron SDM/Modbus smart meter series.☆73Updated 5 years ago
- This is the library of the KNX-User-Forum Arduino project initiated by thorsten Gehrig☆48Updated 5 months ago
- A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)☆87Updated 10 months ago
- Hardware battery safety controller (BSC)☆26Updated 11 months ago
- reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)☆252Updated 7 months ago
- Try to reverse a BYD battery system☆24Updated 2 years ago
- An M-bus master that poll a meter and logs data to an MQTT server☆52Updated 8 years ago
- Modbus TCP <-> MQTT glue. YAML configuration. Robust.☆84Updated 9 months ago
- Readout of EMS protocol datagrams and transfer of data to Domoticz via Arduino☆90Updated 4 years ago
- Arduino library for reading ORNO WE Modbus Energy meters☆16Updated 2 years ago
- Firmware for OpenEnergyMonitor OpenEVSE☆18Updated 2 years ago
- Modbus master which publishes via MQTT☆63Updated last month
- ESP8266 MQTT SDM ModBus Energy Meter☆22Updated 6 years ago
- ESP8266 Modbus TCP to RTU gateway☆19Updated 5 years ago
- ☆15Updated 7 years ago
- Growatt Inverter monitoring via MQTT using ESP8266 modbus interface☆67Updated 5 years ago
- An onboard realtime status display for Renault ZOE vehicles☆20Updated 6 years ago
- This library supports the reading and parsing of smartmeter protocols that follow the OBIS number logic to make their data available.☆55Updated last year
- LG Resu 10 LV Monitor☆29Updated 5 years ago
- ☆29Updated 2 years ago
- Modbus RTU to MQTT Gateway☆82Updated last week
- Open-source Heatpump Monitor☆77Updated 11 months ago
- YASDI is an implementation of the SMA Data Protocols, through which our inverters communicate with other SMA devices.☆10Updated 2 years ago
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.☆32Updated last month
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆82Updated 3 weeks ago
- Support files for managing and deploying my Victron Venus OS stuff☆19Updated 4 years ago
- WLAN/LAN to CAN-Bus Gateway für Kommunikation mit TopTronic(R) E Geräten von Hoval AG☆34Updated last month
- A very flexible ESP32 power meter / energy meter with SCT-013-0x0, ZMPT101B, ACS712 sensors☆43Updated last year
- EPSolar Solar Charge Controller to MQTT☆43Updated 3 years ago