dpfrey / mangOH_Waveshare_EinkLinks
Linux kernel framebuffer driver for Waveshare E-Ink displays
☆17Updated 6 years ago
Alternatives and similar repositories for mangOH_Waveshare_Eink
Users that are interested in mangOH_Waveshare_Eink are comparing it to the libraries listed below
Sorting:
- "Das U-Boot" Source Tree☆71Updated 4 years ago
- PCBs designed by Icenowy☆27Updated 3 years ago
- USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware☆31Updated 5 years ago
- eMMC WFBGA153 to microSD card adapter PCB☆64Updated last year
- KiCad library and templates for creating designs with Mini-PCI-express cards (both the cards and sockets).☆103Updated 7 years ago
- USB-PD charger as a programmable power supply.☆70Updated 4 years ago
- A Qi wireless power receiver using attiny13☆57Updated 6 years ago
- Linux kernel source tree☆89Updated 4 years ago
- CH340, CH343, CH342, CH344,CH348☆35Updated 2 years ago
- 8051 microcontroller☆40Updated 7 years ago
- Config files for full Lichee Pi Nano Linux image build☆123Updated last year
- My library of custom and collected KiCAD drawings☆32Updated 2 years ago
- Longduino is an Arduino port for gd32v mcu.☆69Updated 3 years ago
- Its a cheap "single board computer". Closest analogue Lichee PI.☆32Updated 4 years ago
- PCB Hardware/ Design Document For ttyMay DIY linux board☆58Updated 3 years ago
- HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…☆83Updated 2 years ago
- Footprints and template for making your own M.2 devices☆112Updated last month
- Convert electronic paper display waveforms from .wbf to .wrf format☆37Updated 3 years ago
- A Linux kernel driver for ch341 emulating the I2C bus☆118Updated last year
- Linux kernel driver for CH341A USB to SPI and GPIO adapters☆182Updated last year
- Open Source Logic Analyzers and data Syphons☆81Updated 3 years ago
- Patches include sunxi platform support and various driver fixes☆82Updated 8 months ago
- OpenOCD port running on ESP32-S3 microcontrollers☆83Updated 5 months ago
- DFU bootloader for STM32F103, for use with any F103 code and target☆30Updated 9 years ago
- The original, unmodified Segger RTT source files distributed with JLink☆36Updated 3 months ago
- Buildroot for ido-som2d01 (and similar SSD20xD) based boards.☆10Updated 2 years ago
- KiCad libraries generated from the STM32Cube database.☆61Updated 4 months ago
- SmuView is a GUI for sigrok that supports power supplies, electronic loads and all sorts of measurement devices like multimeters, LCR met…☆145Updated 2 months ago
- NGFF (M.2) edge connector footprints and symbols for KiCAD☆40Updated 5 years ago
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆90Updated 4 years ago