Alternatives and similar repositories for linux-rpi-audi-dis

Users that are interested in linux-rpi-audi-dis are comparing it to the libraries listed below

• derpston / Audi-radio-DIS-reader
  A tool for reading the text that an Audi radio sends to the Driver Information System LCD.
  ☆30Updated 12 years ago
• IgorReal / SECUduino
  ☆29Updated 13 years ago
• hackingvolvo / SardineCAN-Win32
  Win32 DLL for Sardine CAN (Open Source J2534 device)
  ☆53Updated 10 years ago
• Magister54 / opengauge
  Automatically exported from code.google.com/p/opengauge
  ☆143Updated 3 years ago
• tomaskovacik / arduino
  ☆41Updated 4 years ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆85Updated 10 years ago
• brendan-w / pihud
  Configurable heads up display fit for the Raspberry Pi
  ☆46Updated 9 years ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆80Updated 5 years ago
• CANBus-Triple / CANBus-Triple-Hardware
  Eagle CAD files for CANBus Triple Hardware
  ☆56Updated 8 years ago
• calvincestari / ecuExplorer
  An open-source application for the Subaru ECU.
  ☆34Updated 6 years ago
• zapta / linbus
  An Arduino based LINBUS stack and signal interceptor/injector.
  ☆195Updated 6 years ago
• alexandreblin / arduino-can-reader
  An Arduino sketch to read data from a CAN bus
  ☆96Updated 6 years ago
• openvehicles / CAN-RE-Tool
  A reverse engineering tool for systems based on CAN bus communications
  ☆83Updated 4 years ago
• stirobot / arduinoModularTFTgauges
  Modular (configurable via a config file) gauges for 1.8" and other common tft boards
  ☆37Updated 8 years ago
• kmalinich / node-bmw-ref
  BMW CANBUS/DBUS/IBUS/KBUS information/reference/examples
  ☆61Updated 6 years ago
• micahpearlman / zero-o2-simulator
  An 02/lambda eliminator/simulator to tune an engine ECU in closed loop mode.
  ☆17Updated 10 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆56Updated 4 years ago
• kmalinich / node-bmw-client
  A node.js powered interface for E38/E39/E53 + E6x/E9x BMW vehicles (Client side)
  ☆163Updated last month
• AppSaloon / ecu-can-bus-simulator
  This is a small example sketch that simulates a cars ecu
  ☆80Updated 4 years ago
• gilbitron / Cardash
  OBD-II dashobard for Raspberry Pi powered by Nodejs
  ☆51Updated 11 years ago
• Knio / carhack
  Automotive data aquisition, logging, diagnostics, and visualization project. Focusing on CAN-bus and the Nissan 370Z
  ☆79Updated 9 years ago
• dheera / python-fordreader
  Python library to read steering wheel angles and more from a Ford car over OBD
  ☆30Updated 6 years ago
• festlv / canbus_logger
  CANBus logger using Arduino + MCP2515 with GUI in Python
  ☆24Updated 12 years ago
• sparkfun / OBD-II_UART
  A board that provides a serial interface with a vehicle's OBD-II bus.
  ☆83Updated 5 years ago
• huirad / rpi_obd2
  Minimalistic access to OBD2 data with an ELM327 compatible adapter
  ☆22Updated 10 years ago
• fabiobaltieri / toyothack
  Sample application to decode CAN bus frames on a Toyota internal bus
  ☆88Updated 11 years ago
• 360trev / ME7_95040sum
  BSD Licensed tool written in C for Bosch ME7.x EEPROM data dump checksum validations. Specifically validates dump files for 95040 IC 512b…
  ☆12Updated 12 years ago
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆105Updated 6 years ago
• alexandreblin / arduino-peugeot-can
  Arduino sketch to retrieve data from a Peugeot's CAN bus
  ☆99Updated 8 years ago
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆111Updated 4 years ago