IgorReal / SECUduino

Related projects ⓘ

Alternatives and complementary repositories for SECUduino

• CANBus-Triple / CANBus-Triple-Hardware
  Eagle CAD files for CANBus Triple Hardware
  ☆55Updated 7 years ago
• seishuku / teensycanbusdisplay
  Jetta TDI aux display
  ☆18Updated 4 years ago
• tomaskovacik / arduino
  ☆39Updated 3 years ago
• openvehicles / CAN-RE-Tool
  A reverse engineering tool for systems based on CAN bus communications
  ☆79Updated 3 years ago
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆30Updated 10 years ago
• togglebit / ArduinoDUE_OBD_FreeRunningCAN
  These classes have been built with free-running CAN and OBDII data acq in mind
  ☆46Updated 2 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆67Updated 5 years ago
• p1ne / arduino-can-bus-library
  CAN Bus Shield - MCP2515&MCP2551
  ☆11Updated 7 years ago
• zapta / linbus
  An Arduino based LINBUS stack and signal interceptor/injector.
  ☆184Updated 5 years ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆33Updated 6 years ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆75Updated 4 years ago
• kangassu / j1850_reader
  OBD2 reader with Arduino Uno supporting SAE J1850 VPW protocol
  ☆12Updated 9 years ago
• autowp / CANreader
  Android CAN client
  ☆58Updated 7 years ago
• McNeight / CAN_Library
  Multiplatform Arduino library for supporting the native CAN controller on Due (SAM3X) and Teensy 3.1 (K2X) as well as MCP2515 through SPI
  ☆95Updated 6 years ago
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆99Updated 6 years ago
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆109Updated 4 years ago
• alexandreblin / arduino-can-reader
  An Arduino sketch to read data from a CAN bus
  ☆94Updated 5 years ago
• ihaque / arduino-ecu-logger
  Arduino-based OBD2 engine monitor and data logger
  ☆33Updated 8 years ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆34Updated 6 months ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆74Updated 9 years ago
• stirobot / arduinoModularTFTgauges
  Modular (configurable via a config file) gauges for 1.8" and other common tft boards
  ☆33Updated 8 years ago
• franksmicro / Arduino
  Repository for sharing my open-source Arduino code
  ☆128Updated 5 years ago
• rpkish / Subduino-SSM
  Subaru Select Monitor to Canbus adapter
  ☆25Updated 6 years ago
• lincomatic / LeafCAN
  SOC Meter for Nissan Leaf - AVR CAN Bus Interface
  ☆42Updated 10 years ago
• Afterglow / arduino-gmlan
  Talk and listen to GMLAN communications in my Vectra-C (03 plate)
  ☆30Updated 11 years ago
• tomaskovacik / vwcdavr
  AVR alternative to vwcdpic HW+SW
  ☆56Updated 2 years ago
• nabilt / Bluetooth-ODB-2-Adapter
  Bluetooth ODB-2 Adapter based on the STN1110
  ☆41Updated 7 years ago
• irvined1982 / arduino-ELM327
  ELM327 Library for Arduino
  ☆70Updated 4 years ago
• Seeed-Studio / CANBUS_SHIELD_OBD_RECIPLE
  A reciple about obd, use seeestudio CANBUS Shield and TFT Touch Shield 2.0.
  ☆12Updated last month