daromer2 / SDM630toMQTTLinks
esp8266 IoT to mqtt bridge. Eastron SDM220, SDM230, SDM630 modbus; AZ7798; SenseAir s8; BME280; HDC1080; Plantower PMS5003, PMS7003, PMSA003
☆20Updated 3 years ago
Alternatives and similar repositories for SDM630toMQTT
Users that are interested in SDM630toMQTT are comparing it to the libraries listed below
Sorting:
- ESPHome component to monitor a Solax X1 mini via RS485☆39Updated this week
- reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)☆255Updated 10 months ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆87Updated 3 weeks ago
- Use an ESP8266 to read live-, statistical- and status-data from an EpEver LandStar (LS1024B) via Modbus and publish using MQTT☆32Updated 6 years ago
- reading DDS238-4 W; DDS238 4 ZN/S; DDS238 2 ZN/S; DDS238 1 ZN Modbus Energy meters from arduino (esp8266, avr)☆8Updated 5 years ago
- Read data from victron mppt and transport to mqtt server☆42Updated 2 years ago
- Device to measure energy and temperature☆80Updated 6 years ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆109Updated 3 years ago
- Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .☆54Updated 8 months ago
- Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)☆116Updated 4 years ago
- Growatt Inverter monitoring via MQTT using ESP8266 modbus interface☆68Updated 5 years ago
- Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE, enhanced with I2C options☆126Updated 6 months ago
- ESPHome support for cheap WiFi PIR sensors☆67Updated 3 years ago
- EspEpeverController mit Webseite, Der Esp8266 ist über ein Rs485 Modul mit dem Epever Solar Laderegler verbunden und kann diesen die verf…☆44Updated last year
- Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)☆155Updated last year
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆129Updated 3 years ago
- EPSolar Solar Charge Controller to MQTT☆43Updated 3 years ago
- Get readings from the Bluetooth Smart BMS from https://www.lithiumbatterypcb.com/ in FHEM☆14Updated 3 years ago
- Reads data from the Sage BMS console port and publishes to MQTT☆27Updated 3 months ago
- Arduino library to control non-smart roller shutters using time☆61Updated 5 years ago
- ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters☆41Updated 3 years ago
- Growatt ShineWifi modbus with ESPHome code to run native in Home Assistant☆32Updated 11 months ago
- Readout of EMS protocol datagrams and transfer of data to Domoticz via Arduino☆90Updated 4 years ago
- This library provides functions to communicate through the EMS Bus with Buderus/Nefit/Worcester (or any other EMS Bus compatible) boilers…☆17Updated 6 years ago
- ☆101Updated last year
- Arduino library and hardware shield to send and receive data from Opentherm devices☆176Updated last year
- ☆61Updated 2 years ago
- ESPHome Modbus Server component☆45Updated last year
- ☆33Updated 2 years ago
- An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app.☆65Updated 6 years ago