Alternatives and similar repositories for 3-Phase-Controller

Users that are interested in 3-Phase-Controller are comparing it to the libraries listed below

• cinderblock / 3-Phase-Driver
  Hardware design for a 3 Phase BLDC controller
  ☆57Updated 5 years ago
• fugalster / Smart-BLDC-Commutator-Hardware
  ☆16Updated 10 years ago
• ottoragam / Brushed-DC-Servo-Drive
  Low cost servo drive for small CNC machinery
  ☆54Updated 8 years ago
• DizzyRobot / DirectServo
  Controller that drives BLDC motor as servo
  ☆74Updated 5 years ago
• Scavenger18 / RepoPNP
  Files concering PAIND PNP Feeder
  ☆23Updated 6 years ago
• joewa / bldc-strip
  OpenBLDC Strip (STM32F103)
  ☆65Updated 8 years ago
• ottoragam / Tarocco
  Closed Loop Motor Controller
  ☆133Updated 4 years ago
• lucysrausch / ottercontrol
  Hardware files for OtterControl BLDC motor controller
  ☆64Updated 5 years ago
• openpnp / mica-feeder
  Automatic SMT Tape Feeder by Pham Thang
  ☆19Updated 7 years ago
• issus / NEMA8-Juki-Tool-Changer
  Pick and Place tool changer nozzle to hold Juki 500 series nozzles on a NEMA8 hollow shaft motor
  ☆28Updated 8 years ago
• dining-philosopher / litefeeder
  Semi-automatic passive printable/castable feeder for LitePlacer
  ☆58Updated 5 years ago
• pointhi / HighPower-Mechaduino
  Mechaduino derivative which drives up to 10A, drawn using KiCad
  ☆29Updated 5 years ago
• paltatech / half-bridge
  TO247 half bridge module for EVs
  ☆15Updated 6 years ago
• Neuromancer2701 / BLDC_ros_controller
  ☆46Updated 7 years ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 5 years ago
• Danny24 / smart_motor_driver
  This motor driver is designed to be interfaced from a host microcontroller by I2C and be able to control the motor with a PID autonomousl…
  ☆33Updated 2 years ago
• madcowswe / Servo
  High performance motor control
  ☆90Updated 8 years ago
• jakeread / tesc
  in-progress motor controller, towards accessible closed-loop control
  ☆13Updated 7 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• EGG-electric-unicycle / firmware-gen2_boards
  ☆30Updated 7 years ago
• bdring / PSoC_Grbl
  PSoc5 Port of Grbl CNC Controller
  ☆36Updated 8 years ago
• paltatech / bldc
  The code for my custom BLDC controller.
  ☆13Updated last year
• uStepper / uStepperS
  ☆54Updated last year
• fluidfred / powerlolu
  High Power Pololu Board based on A4989 - can be connected to RAMPS Pololu port
  ☆30Updated 10 years ago
• bluerobotics / tgy
  Modification of the tgy firmware to support I2C communication for the BlueESC.
  ☆22Updated 6 years ago
• mgineer85 / sFeeder
  Parametric Feeder Design, load in OpenSCAD to make yours.
  ☆20Updated last year
• Ralim / Open-BMS
  ISL94202 & MSP430 based BMS
  ☆42Updated 4 years ago
• osresearch / servostep
  Closed loop servo control for stepper motors
  ☆10Updated 9 years ago
• DDeGonge / OpenBLDCServo
  Open Source Brushless DC Servo
  ☆13Updated 6 years ago
• Dark-Guan / Ananas
  This is an Arduino based program for step motor controller,Ananas.
  ☆51Updated 8 years ago