Alternatives and similar repositories for OpenBM

Users that are interested in OpenBM are comparing it to the libraries listed below

• karis79 / bmw-ibus
  Bmw IBUS daemon
  ☆26Updated 13 years ago
• harryberlin / AVR-IBus.public
  DIY Modul for BMW Cars with I-/K-Bus
  ☆27Updated 4 months ago
• bsalvador / BMW_NBT_Tools
  Some tools to handle NBT BMW files
  ☆12Updated 9 years ago
• kmalinich / node-bmw-client
  A node.js powered interface for E38/E39/E53 + E6x/E9x BMW vehicles (Client side)
  ☆169Updated 2 weeks ago
• vimsh / mafscaling
  Car ECU logs processing: MAF scaling/rescaling, Table rescaling, Throttle Maps, Load / Injector Pulse Width / IAT compensation, Speed Den…
  ☆84Updated 2 years ago
• jglim / CaesarSuite
  Library and applications to work with Dаіmlеr diagnostics CBF files.
  ☆159Updated 6 months ago
• bri3d / VW_Flash
  Flashing tools for VW AG control units over UDS. Compression, encryption, RSA bypass, and checksums are supported for Simos18.1/6/10, DQ2…
  ☆451Updated 2 months ago
• NefMoto / NefMotoOpenSource
  Open source collaborative projects driven by the NefMoto.com community
  ☆110Updated 2 weeks ago
• bri3d / Simos18_SBOOT
  Documentation and tools about Simos18 SBOOT (Supplier Bootloader), including a Seed/Key bypass and Tricore boot password recovery tool.
  ☆126Updated 3 years ago
• Switchleg1 / SimosTools
  Tool to assist in tuning simos ECUs.
  ☆56Updated 4 years ago
• fenugrec / nisprog
  nisprog Nissan ECU reflashing tool
  ☆100Updated 2 years ago
• nyetwurk / ME7Sum
  Checksum/CRC checker/corrector for Motronic ME7.1 firmware images. Download binaries here:
  ☆86Updated last month
• mrfixpl / MQB-sniffer
  CAN-BUS sniffing for Volkswagen Golf MK7 (and most likely other MQB platform cars)
  ☆83Updated last month
• Switchleg1 / BinToolz
  Do stuff with binz and such.
  ☆29Updated 2 months ago
• turboat / eepromtool
  ☆53Updated 2 years ago
• kmalinich / node-bmw-ref
  BMW CANBUS/DBUS/IBUS/KBUS information/reference/examples
  ☆68Updated 7 years ago
• pavelmalik / BMWCanBridge
  Arduino Due solution for adding vin-coded modules to BMW cars
  ☆66Updated 7 years ago
• BoredTruckOwner / LS_Based_Engine_Repository
  Collection of LS Based Engine Bins and the Required XDFs for TunerPro
  ☆113Updated 3 years ago
• fenugrec / nissutils
  ☆56Updated 8 months ago
• fjvva / ecu-tool
  Tool to communicate with vehicle ECUs based on Arduino
  ☆219Updated 10 years ago
• baconwaifu / PyVCDS
  An attempt at re-implementing VCDS in python and socketCAN, using publicly available information and black-box reverse engineering.
  ☆95Updated 2 years ago
• bahnz / BMW-6HPxx-XDF
  TunerPro definition file for BMW 6HPxx transmissions.
  ☆26Updated 8 years ago
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆115Updated 5 years ago
• fiztech-code / BeanMPX
  Toyota's Bean Multiplex Communication Protocol for Arduino
  ☆62Updated 4 years ago
• bouletmarc / HondaReflashTool
  Open Source CanBUS J2534 Honda/Acura Reflash Tool (Work in Progress)
  ☆72Updated 3 years ago
• KalebKE / ME7Tuner
  ME7Tuner is software that provides tools to help calibrate the MAF, primary fueling and torque/load requests
  ☆63Updated last year
• bri3d / TC1791_CAN_BSL
  CAN Bootstrap Loader (BSL) for Tricore AudoMAX (TC1791 and friends), including arbitrary read/write as well as compressed read functional…
  ☆69Updated 3 weeks ago
• rnd-ash / openStar
  Opensource diagnostic software for Daimler vehicles, inspired by Xentry and DAS, written in Rust
  ☆71Updated 4 years ago
• ConnorRigby / rx8-ecu-dump
  utility to dump the Mazda RX8 (and maybe others) ECU firmware
  ☆35Updated 3 years ago
• Boromatic / SpeckMobil
  Experimental VW/Audi specific diagnostic software for ELM327
  ☆17Updated 11 years ago