Alternatives and similar repositories for node-bmw-interface

Users that are interested in node-bmw-interface are comparing it to the libraries listed below

• kmalinich / node-bmw-ref
  BMW CANBUS/DBUS/IBUS/KBUS information/reference/examples
  ☆58Updated 6 years ago
• kmalinich / node-bmw-client
  A node.js powered interface for E38/E39/E53 + E6x/E9x BMW vehicles (Client side)
  ☆158Updated last week
• kmalinich / dieslg8
  Arduino Uno + Seeed Studio CANBUS + BMW M57 diesel
  ☆43Updated 3 years ago
• nberlette / bmw-dbc
  BMW E90 & E39 CAN definitions
  ☆35Updated 3 years ago
• pavelmalik / BMWCanBridge
  Arduino Due solution for adding vin-coded modules to BMW cars
  ☆58Updated 6 years ago
• piersholt / wilhelm-docs
  BMW I/K-Bus Documentation
  ☆107Updated 5 months ago
• kostaszaf / can-gateway-sniffer
  An embedded CAN bus sniffer which is able to monitor any of the vehicle internal CAN bus and perform some action by triggering new CAN me…
  ☆67Updated 3 years ago
• damienmaguire / CAN-BUS-Man-In-The-Middle
  CAN BUS Man In The Middle for spying on and modifyling automotive can traffic on the fly.
  ☆33Updated 5 years ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆83Updated 10 years ago
• just-oblivious / arduino-ibustrx
  Arduino library for sending and receiving messages over the BMW infotainment bus (IBUS).
  ☆60Updated 7 years ago
• HeinrichG-V12 / E65_ReverseEngineering
  ☆42Updated 3 years ago
• qnx425 / ELM327SLCAN
  ELM327 based vehicle's CAN bus sniffer
  ☆64Updated 6 years ago
• Alfaa123 / Volvo-CAN-Gauge
  Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
  ☆111Updated 3 years ago
• laurynas / volvo_linbus
  Volvo LIN bus reader
  ☆93Updated 4 years ago
• domnulvlad / KLineKWP1281Lib
  Arduino / ESP / RPi Pico library integrating the proprietary VAG Key-Word 1281 protocol (KWP1281/KW1281)
  ☆59Updated 9 months ago
• laurynas / volvo_crankshaft
  Volvo V50 RTI Crankshaft project
  ☆58Updated 4 years ago
• baconwaifu / PyVCDS
  An attempt at re-implementing VCDS in python and socketCAN, using publicly available information and black-box reverse engineering.
  ☆92Updated last year
• shchers / ecu-simulator
  OBD-II ECU Simulator
  ☆64Updated 4 years ago
• muki01 / I-K_Bus
  BMW I/K Bus Control with Microcontrollers like ESP32, Arduino
  ☆29Updated last week
• tsharp42 / E46ClusterDriver
  An Arduino sketch and schematic for the hardware to drive a BMW instrument cluster over CAN-BUS, KBUS and general IO lines. The firmware …
  ☆37Updated 9 years ago
• vtl / volvo-ddd
  VOLVO Driver Distraction Display :)
  ☆66Updated 3 years ago
• v-ivanyshyn / Arduino-OBD2-Async
  Arduino OBD library with asynchronous data requesting.
  ☆18Updated 7 years ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆80Updated 5 years ago
• rnd-ash / Macchina-J2534
  J2534 drivers for various Macchina hardware
  ☆98Updated 2 years ago
• mrfixpl / MQB-sniffer
  CAN-BUS sniffing for Volkswagen Golf MK7 (and most likely other MQB platform cars)
  ☆77Updated 2 years ago
• smartgauges / canbox
  Firmware for canbus boxes
  ☆98Updated last week
• wjcloudy / DBCtoRDXML
  File converter from DBC to RealDash XML
  ☆16Updated 3 months ago
• ludwig-v / arduino-psa-comfort-can-adapter
  Arduino sketch to operate new PSA/Stellantis (Peugeot, Citroen, DS, Opel) comfort devices (CAN2010) on old BSI CAN-BUS (CAN2004)
  ☆66Updated last month
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆48Updated 4 months ago
• bill57p9 / BMW_ZGW_emulator
  BMW CANbus gateway emulator & proxy
  ☆20Updated 4 years ago