Alternatives and similar repositories for PrinterCnc

Users that are interested in PrinterCnc are comparing it to the libraries listed below

• cdhigh / m328v6host
  M8V6电子负载升级版M328V6上位机，支持手机和PC
  ☆12Updated 2 years ago
• fedya / aircam-openwrt
  aircam-openwrt
  ☆10Updated 5 years ago
• gizwits / gokit-mcu
  gokit mcu开源代码
  ☆37Updated 9 years ago
• qdk0901 / openwrt-rt5350
  wifi audio on rt5350
  ☆32Updated 7 years ago
• ForgotFun / n2n
  N2N 一款全新架构的P2P VPN
  ☆28Updated 9 years ago
• HEKR-Cloud / HEKR-ESP8266-SDK
  for ESP8266固件开发人员
  ☆32Updated 9 years ago
• MakerLabMe / STM32_Arduino_Cores
  STM M3 ARM Cores for Arduino IDE.Makes Arduino IDE supports stm32f103.
  ☆146Updated 9 years ago
• nightseas / pi_mods
  Expansion modules for Raspberry Pi B+ & 2B.
  ☆22Updated 8 years ago
• WIFI-DMX / STM32ISP
  STM32ISP Flash Loader Microsoft Visual C++ 6.0
  ☆12Updated 6 years ago
• vachelcai / intelligent-closestool
  一款实用stm32f0芯片,采用st公司的HAL库及freeRTos为基础来开发的智能马桶主板软件,(包含软件硬件).采用市场较为流行的即热式模块.
  ☆10Updated 5 years ago
• posystorage / serprog-stm32-gd32
  stm32/gd32 spi-flash vcp
  ☆20Updated 7 years ago
• wuxx / nrf24-ble
  ☆20Updated 4 years ago
• yplam / openwrt-mt7688-4g
  基于 MT7688 与 EC20 配置个人 4G WIFI 路由器
  ☆15Updated 4 years ago
• yuliang8 / V3S_OV2640_RTMP
  基于全志V3S平台的，OV2640摄像头，以太网网络的RTMP视频直播监控平台。
  ☆23Updated 5 years ago
• kavichen / MK_BrushLess-Control
  ☆15Updated 11 years ago
• KnightSin / Grbl_Esp32
  A port of Grbl CNC Firmware for ESP32
  ☆41Updated 3 years ago
• makerdiary / Smart-Plug
  An open source ZigBee plug for your own smart home
  ☆41Updated last year
• WRTnode / WRTnodePCB
  The hardware project of WRTnode
  ☆42Updated 7 years ago
• leiyitan / 20-Channel-High-Side-NMOS-Driver-Board
  一款20通道，带回读、指示灯、过流保护，NMOS高侧驱动板（24V,10A）
  ☆22Updated 6 years ago
• gizwits / Gizwits-GAgent
  Gizwits-GAgent作为机智云物联网整体解决方案中可入网设备（如WiFi模组、GPRS模组）接入部分，是一套运行在可入网模组（如WiFi模组、GPRS模组）上，使用机智云协议接入机智云平台，并与手机APP（SDK）通信、下位机控制设备终端MCU通信的程序。该程序运行…
  ☆100Updated 9 years ago
• bigiot / bigiotOpenwrt
  贝壳物联嵌入式Linux代码
  ☆20Updated 9 years ago
• Zepan / hairBoot
  A tiny bootloader for STM8S low-density family
  ☆66Updated 9 years ago
• 19greg96 / MonoGUI
  Graphical User Interface library for monochromatic GLCDs
  ☆10Updated 4 years ago
• but0n / IrDA-stm32
  ☆51Updated 4 years ago
• yilanjueding123 / quanzhiwork
  ☆19Updated 7 years ago
• dword1511 / serprog-stm32vcp
  Please consider the new stm32-vserprog (https://github.com/dword1511/stm32-vserprog) project which uses libopencm3 and compiles with stan…
  ☆67Updated 9 years ago
• tessel / uboot-mt7620
  U-Boot bootloader for MT7620 (Tessel 2)
  ☆15Updated 10 years ago
• esden / open-bldc-mk
  A sideproject of Open BLDC. Open source Firmware for Mikrokopter BrushLess DC Motor controllers.
  ☆22Updated 14 years ago
• wuxx / RPI-HAT-Programmer
  树莓派多功能编程器
  ☆37Updated 3 years ago
• MiaowLabs / MWbalanced-firmware-none
  MWbalanced 8051 control source code with no RTOS.
  ☆41Updated 8 years ago