Alternatives and similar repositories for Solder-Reflow-Oven:

Users that are interested in Solder-Reflow-Oven are comparing it to the libraries listed below

• xpDIY / 3DPlacer
  The repo contains the design for converting the 3d printer to pick and place machine
  ☆32Updated last month
• microsmt / Microsmt-PNP-hardware
  All documents about making microsmt pnpboard
  ☆52Updated 2 weeks ago
• Apehaenger / Another-HotPlate-Firmware
  A feature-rich reflow Hot-Plate firmware i.e. usable for "Tim's Hot Plate" (https://www.instructables.com/Tims-Hot-Plate/)
  ☆23Updated last year
• scheffield / stencil-fix-portable
  ☆60Updated 2 months ago
• EmanuelBender / HEX_POD
  Multi-sensor intelligent environmental Monitor
  ☆15Updated 10 months ago
• rallekralle11 / Epi_4L
  4 layer version of the Epi 32U4
  ☆56Updated last year
• aeonSolutions / AeonLabs-Solder-Reflow-Plate-PCB
  Solder Reflow Plate PCB
  ☆31Updated last year
• mike-rankin / ESP32-S3_MLX90640_Thermal
  ESP32-S3 Thermal Sensor using an 8-bit bus
  ☆75Updated 10 months ago
• polihedron / DIY-Reflow-Oven
  DIY Reflow Oven, mcu: STM32F103 dev board, Display: Nextion Basic 3.5", PID controller.
  ☆32Updated 3 years ago
• UnexpectedMaker / vacuum-stencil-box
  ☆29Updated 3 years ago
• scheffield / stencil-fix
  CAD files for the open source Stencil Fix
  ☆62Updated last year
• dronecz / ESP32-Reflow-Controller
  Reflow controller with ESP32 and TFT LCD on board.
  ☆68Updated last month
• DurandA / reflow946
  Bluetooth LE temperature controller for the 946C electronic hot plate
  ☆103Updated 9 months ago
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆42Updated 3 years ago
• wntrblm / jellyfish-and-starfish
  ☆103Updated 2 years ago
• luc-github / ESP3D-TFT
  ESP3D Firmware for ESP32 based TFT
  ☆43Updated 2 months ago
• kingoflolz / linear-actuator-hardware
  ☆60Updated 2 years ago
• MariusHeier / magik_solder_paste_stencil_box
  Is it magik? Or is it just a 3d printed box for holding your solder stencils with automatic lifting and vacuum hold down?
  ☆33Updated 3 years ago
• hxelec / s3p
  ☆80Updated 10 months ago
• alanesq / BasicOLEDMenu
  A very simple menu system using an oled and rotary encoder
  ☆53Updated 10 months ago
• robin7331 / pixel-pump-mainboard
  ☆39Updated last year
• DerSpatz / PCB-reflow-solder-heat-plate
  hardware design for a PCB reflow solder heat plate
  ☆119Updated last year
• khoih-prog / RP2040_PWM
  This library enables you to use Hardware-based PWM channels on RP2040-based boards, such as Nano_RP2040_Connect, RASPBERRY_PI_PICO, with …
  ☆78Updated 2 years ago
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆57Updated 2 months ago
• duritskiy / easyeda-MyExtensions
  A useful extension for EasyEda that creates a Menu for all your installed scripts
  ☆29Updated last year
• ahmsville / Magnetic_rotary_encoding
  A library for setting up magnetic rotary encoding in C/C++ & MicroPython, The library also features a haptics controller which allows you…
  ☆117Updated last year
• c0pperdragon / HotPlate
  ☆31Updated 9 months ago
• wagiminator / CH32X035-USB-PD-Adapter
  Portable Programmable Power Supply
  ☆40Updated last month
• Makerfabs / MaTouch-ESP32-S3-Rotary-IPS-Display-with-Touch-2.1-ST7701
  ☆34Updated last week
• yaybee / easyeda2kicad6
  Converter for pcb and schematics of EasyEDA to Kicad version-6
  ☆28Updated 3 years ago