bryanrandell / Kinowheels_3-Axis_wireless_for_DJI_RoninLinks
3 Axis Kino wheels to command a DJI Ronin via SBUS protocol using Arduino boards.
☆12Updated 3 years ago
Alternatives and similar repositories for Kinowheels_3-Axis_wireless_for_DJI_Ronin
Users that are interested in Kinowheels_3-Axis_wireless_for_DJI_Ronin are comparing it to the libraries listed below
Sorting:
- Ronin-S CAN protocol debug.☆13Updated 4 years ago
- An open-source camera control hand-wheels project based on the Kino Wheels project.☆11Updated 5 years ago
- hacked library and test sketch for controlling blackmagic micro cameras from an arduino over sbus☆44Updated 6 years ago
- Professional level DIY Camera Motion Control System☆98Updated 2 months ago
- Tilta Nucleus N reverse engineering☆26Updated 4 years ago
- Arduino ESP32 Library for connecting to Blackmagic Cameras using Bluetooth Low Energy.☆101Updated 10 months ago
- SMPTE/LTC decoder for Teensy 3.2 microcontroller audio shield☆24Updated 3 years ago
- Wireless tally and camera control for Blackmagic cameras connected directly to an ATEM switcher over WiFi☆21Updated 2 weeks ago
- ESP32 based SMPTE/EBU timecode generator, with NTP slaving, for Leitch and similar studio/broadcast clocks.☆54Updated 2 years ago
- An Open Source SMPTE Linear Timecode Generator Based on ATmega328P(Arduino UNO).☆63Updated 3 years ago
- based on the Ronin SDK this simple two script python setup reads and logs gimbal yaw, roll, pitch, and focus position, and then can repla…☆47Updated 2 years ago
- LTC decoder for Teensy Audio Library☆32Updated 5 years ago
- A library for connecting an Arduino with Ethernet shield to Blackmagic Designs ATEM video switcher range.☆18Updated 13 years ago
- Linear Timecode Generator for ESP32☆12Updated 4 years ago
- A project to control the Black Magic line of cameras through the LANC port, probably with an arduino or ESP 8266☆19Updated 7 years ago
- Wireless tally light for use with ATEM switchers, which connects over WiFi, using an ESP WiFi module.☆175Updated last month
- UNOFFICIAL - A free open source DMX/RDM controller/sniffer working with ETC's Gadget2 hardware platform☆24Updated last year
- vTally - Wireless Tally and VISCA converter for vMix☆16Updated 3 years ago
- Project to store DMX frames received over ArtNet into a SD card and play them back to a WS2812B LED strip using nodemcu☆41Updated 6 years ago
- Arduino camera remote control (LANC interface)☆24Updated 9 years ago
- Send and receive sACN DMX packets following ANSI E1.31☆22Updated 10 months ago
- CNC plugin for the torch height controlling on the base of Arduino☆18Updated 5 years ago
- My DIY 3 Axis Camera Slider Project☆24Updated 3 years ago
- Arduino based VISCA controller for Cisco TelePresence Precision series of cameras☆26Updated 4 years ago
- Images for Allwinner H2+/H3 DMX512 / RDM / Art-Net / sACN / USBPro / Pixel / WS28xx / TCNet / SMPTE☆89Updated 4 months ago
- Python ATEM mixer control library☆20Updated 7 years ago
- CRMX TimoTwo Library for MKR Wireless DMX Shield☆23Updated 5 years ago
- BluMagx - Bluetooth Remote Controller for Blackmagic Design cameras☆11Updated 4 years ago
- h's mo-co stuff☆34Updated 8 years ago
- Node.js ATEM tally interface built to run on a Raspberry Pi over XLR cables☆23Updated last year