Alternatives and similar repositories for pybip

Users that are interested in pybip are comparing it to the libraries listed below

• particle-iot / beacon-scanner-library
  A library for scanning BLE beacons
  ☆16Updated last year
• ueno / libusb-gadget
  Simple wrapper library to access Linux USB GadgetFS
  ☆49Updated 16 years ago
• bluekitchen / raccoon
  Raccoon BLE Sniffer
  ☆96Updated 8 months ago
• NordicPlayground / nrf51-UART-examples
  nRF51 UART examples
  ☆63Updated 7 years ago
• adafruit / Adafruit_BLESniffer_Python
  Python API for Adafruit's Bluefruit LE Sniffer
  ☆104Updated last year
• jocover / BLESDR
  Bluetooth Low Energy SDR C++ Library
  ☆58Updated 7 years ago
• libusbg / libusbg
  USB Gadget Configfs Library
  ☆96Updated 8 years ago
• gbrault / gattclient
  A gatt client, based on bluez stack -- just using socket
  ☆46Updated 9 years ago
• ambrosa / DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0
  RTL2832U driver modded for Linux kernel 3.0.0
  ☆54Updated 9 years ago
• nymea / nymea-networkmanager
  This daemon allows to set up the wireless network using a Bluetooth LE connection.
  ☆57Updated 3 weeks ago
• NXPNFCLinux / nxp-pn5xx
  NXP's NFC Open Source Kernel mode driver
  ☆40Updated 2 years ago
• frawau / aioblescan
  Python only library to scan and decode advertised BLE info. Uses asyncio. Can decode Ruuvi Tag. Can broadcast EddyStone packets.
  ☆126Updated 11 months ago
• andrewdodd / pyCCSniffer
  Python 802.15.4 packet sniffer for the CC2531 EMK from Texas Instruments
  ☆87Updated 3 years ago
• homewsn / whsniff
  Whsniff is a command line utility that interfaces TI CC2531 USB dongle with Wireshark for capturing and displaying IEEE 802.15.4 traffic …
  ☆136Updated 11 months ago
• adafruit / Adafruit_nRF51822_Flasher
  Wrapper for the Segger J-Link or STLink/V2 (via OpenOCD) to flash nRF51822 MCUs
  ☆41Updated 8 years ago
• moovel / gatt-server
  Standalone D-Bus-based BlueZ BLE GATT server for C/C++
  ☆26Updated 7 years ago
• linux-usb-gadgets / libusbgx
  C library encapsulating the Linux kernel USB gadget configfs userspace API functionality
  ☆232Updated 9 months ago
• ura14h / Blesniffer
  A Bluetooth LE sniffer for CC2540 USB dongle and Mac.
  ☆39Updated 8 years ago
• oroce / BLE-CC254x-1.4.0
  my version of BLE-CC254x-1.4.0, check the branches
  ☆32Updated 9 years ago
• pfalcon / PySWD
  Implementation of the ARM SWD (Serial Wire Debug) protocol in Python for use with low-cost development boards to manage and flash Cortex …
  ☆33Updated 10 years ago
• Jumperr-labs / python-gatt-server
  ☆105Updated 3 years ago
• boundarydevices / imx_usb_loader
  USB & UART loader for i.MX5/6/7/8 series
  ☆267Updated last year
• lambdaconcept / usb2sniffer-qt
  Qt-based software for USB2Sniffer
  ☆32Updated 2 months ago
• themrleon / RpiSoft-UART
  A Raspberry Pi / BCM2835 Software-based UART Linux device driver
  ☆133Updated 2 years ago
• jpbrucker / BLE_HID
  HID service implementation for mbed's BLE API
  ☆111Updated 6 years ago
• NordicPlayground / solar_sensor_beacon
  ☆30Updated 8 years ago
• AristoChen / usb-proxy
  A USB proxy based on raw-gadget and libusb
  ☆202Updated 11 months ago
• redbear / nRF5x
  nRF51822 and nRF52832 based baords, e.g. BLE Nano, RBL_nRF51822, Nano 2 and Blend 2
  ☆191Updated 6 years ago
• swift-nav / CC-Bootloader
  USB bootloader for the CC1111 RF SoC
  ☆27Updated 6 years ago
• pfalcon / blutunode
  Autonomous wireless sensor/actuator node using bluetooth modules based on CSR BlueCore chipset. See wiki for more info.
  ☆153Updated 7 years ago