Alternatives and similar repositories for Ford-Fiesta-MK5-MS-CAN-bus

Users that are interested in Ford-Fiesta-MK5-MS-CAN-bus are comparing it to the libraries listed below

• smartgauges / canbox
  Firmware for canbus boxes
  ☆96Updated last year
• prototux / PSA-RE
  PSA (Peugeot/Citroen/DS) electronics architecture reverse engineering.
  ☆84Updated 2 weeks ago
• p1ne / fdim-controller
  Schematic, PCB and source code for a small Arduino-based controller to make Ford FDIM dash display useful again
  ☆40Updated 4 years ago
• LuukEsselbrugge / Volve
  Volvo CAN BUS extender based on ESP32
  ☆97Updated 4 years ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆83Updated 10 years ago
• diamondman / J2534-PassThru-Logger
  J2534 Logging driver and control UI for monitoring J2534 API calls.
  ☆33Updated 7 years ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆48Updated 4 months ago
• rnd-ash / Macchina-J2534
  J2534 drivers for various Macchina hardware
  ☆98Updated 2 years ago
• janimm / RealDash-extras
  RealDash examples and technical materials
  ☆145Updated this week
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆39Updated last year
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆116Updated 9 months ago
• baconwaifu / PyVCDS
  An attempt at re-implementing VCDS in python and socketCAN, using publicly available information and black-box reverse engineering.
  ☆92Updated last year
• autowp / CANreader
  Android CAN client
  ☆61Updated 7 years ago
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆33Updated 11 years ago
• olegel / VolvoCan
  Volvo XC90 CAN bus adapter to restore wheel buttons and park assistant functionality
  ☆45Updated 4 years ago
• kostaszaf / can-gateway-sniffer
  An embedded CAN bus sniffer which is able to monitor any of the vehicle internal CAN bus and perform some action by triggering new CAN me…
  ☆67Updated 3 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆56Updated 4 years ago
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆112Updated 4 years ago
• nberlette / bmw-dbc
  BMW E90 & E39 CAN definitions
  ☆35Updated 3 years ago
• vtl / volvo-ddd
  VOLVO Driver Distraction Display :)
  ☆66Updated 3 years ago
• bri3d / esp32-isotp-ble-bridge
  ESP32-IDF based BLE<->ISO-TP bridge targeting Macchina A0 hardware
  ☆39Updated 2 years ago
• ludwig-v / arduino-psa-comfort-can-adapter
  Arduino sketch to operate new PSA/Stellantis (Peugeot, Citroen, DS, Opel) comfort devices (CAN2010) on old BSI CAN-BUS (CAN2004)
  ☆66Updated last month
• kmalinich / node-bmw-ref
  BMW CANBUS/DBUS/IBUS/KBUS information/reference/examples
  ☆58Updated 6 years ago
• qnx425 / ELM327SLCAN
  ELM327 based vehicle's CAN bus sniffer
  ☆64Updated 6 years ago
• skpang / Arduino_CAN-Bus_ECU_reader
  ☆50Updated 8 years ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆52Updated 4 years ago
• vtl / volvo-cem-cracker
  Volvo central electronic module pin cracker via OBD for P1, P2 and P3 platforms
  ☆133Updated last year
• morcibacsi / PSASteeringWheelAdapter
  ESP32 based steering wheel adapter for Peugeot and Citroen cars
  ☆36Updated 5 years ago
• Alfaa123 / Volvo-CAN-Gauge
  Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
  ☆111Updated 3 years ago
• pavelmalik / BMWCanBridge
  Arduino Due solution for adding vin-coded modules to BMW cars
  ☆58Updated 6 years ago