Alternatives and similar repositories for obd2mqtt

Users that are interested in obd2mqtt are comparing it to the libraries listed below

• xerootg / jeep-can-dash
  This project is a attempt to control a Jeep gauge cluster from a 1997-2012 XJ or 1997-2006 TJ via the VW CAN bus via an Arduino
  ☆9Updated 9 years ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆83Updated 10 years ago
• flynnwt / ouobd2
  ESP8266 Interface to OBD2
  ☆26Updated 9 years ago
• joukoy / gm-checksum-plugins
  Tunerpro checksum plugins for GM PCM files
  ☆46Updated 10 months ago
• bouletmarc / Arduino_Honda_OBD1_BM-Duino
  This is an Arduino Honda OBD1 ECU datalogger from CN2, also able to ignition cut
  ☆15Updated 8 years ago
• damienmaguire / CAN-BUS-Man-In-The-Middle
  CAN BUS Man In The Middle for spying on and modifyling automotive can traffic on the fly.
  ☆33Updated 5 years ago
• kmalinich / node-bmw-ref
  BMW CANBUS/DBUS/IBUS/KBUS information/reference/examples
  ☆58Updated 6 years ago
• 360trev / ME7_95040sum
  BSD Licensed tool written in C for Bosch ME7.x EEPROM data dump checksum validations. Specifically validates dump files for 95040 IC 512b…
  ☆12Updated 12 years ago
• atoid / DashBle
  Wireless BLE based hardware to interface with Honda motorcycle ECU
  ☆29Updated 7 years ago
• jasminpatry / boostino
  A Teensy 3.6-based logger and gauge for my 2014 Subaru STI.
  ☆16Updated 4 years ago
• janimm / RealDash-extras
  RealDash examples and technical materials
  ☆145Updated this week
• tomaskovacik / VAGFISReader
  arduino library to read data on V.A.G. FIS line (3lb, data,enable,clock)
  ☆10Updated 4 years ago
• LuukEsselbrugge / Volve
  Volvo CAN BUS extender based on ESP32
  ☆97Updated 4 years ago
• adamforbes92 / FISCuntrol
  FIS Control for the masses.
  ☆48Updated 6 years ago
• jegb / iDrive_knob
  Arduino canbus reader for events on iDrive knob controller
  ☆13Updated 12 years ago
• muki01 / I-K_Bus
  BMW I/K Bus Control with Microcontrollers like ESP32, Arduino
  ☆29Updated this week
• rsjudka / intelligent-auto
  ☆42Updated 4 years ago
• Bylund / Knock-Shield-Example
  Example code compatible with the Knock Shield for Arduino.
  ☆14Updated 5 years ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆39Updated last year
• skpang / Arduino_CAN-Bus_ECU_reader
  ☆50Updated 8 years ago
• pavelmalik / BMWCanBridge
  Arduino Due solution for adding vin-coded modules to BMW cars
  ☆58Updated 6 years ago
• Metaln00b / NodeMCU-BlackBox
  ESP8266 based CAN-Bus Diagnostic Tool
  ☆43Updated 3 years ago
• autowp / CANreader
  Android CAN client
  ☆61Updated 7 years ago
• MrAzE / arduino_canbus
  Examples of Arduino code used to communicate with canbus.
  ☆10Updated 8 years ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆80Updated 5 years ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆48Updated 4 months ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆52Updated 4 years ago
• nyetwurk / ecuxplot
  Tool for plotting ME7 (VCDS, ECUx, ME7L) logs
  ☆54Updated 7 months ago
• laurynas / volvo_crankshaft
  Volvo V50 RTI Crankshaft project
  ☆58Updated 4 years ago
• themelisx / ESP32CarODB
  Car OBD gauges Arduino TFT
  ☆20Updated last year