Alternatives and similar repositories for Cycloidal

Users that are interested in Cycloidal are comparing it to the libraries listed below

• tapnair / Fusion360HypocycloidGear
  Script to generate Hypocycloid Gears Sketch
  ☆24Updated 10 years ago
• grblHAL / plugins
  Plugins overview
  ☆28Updated 11 months ago
• ottoragam / Brushed-DC-Servo-Drive
  Low cost servo drive for small CNC machinery
  ☆54Updated 9 years ago
• uStepper / uStepperS
  ☆53Updated 2 years ago
• openpnp / mica-feeder
  Automatic SMT Tape Feeder by Pham Thang
  ☆23Updated 8 years ago
• gnea / grbl-LPC
  ☆77Updated 3 years ago
• Aus3D / RUMBA32
  A powerful 32-bit 3D printer control board.
  ☆74Updated 5 years ago
• ryannining / karyacontroller
  4 axis CNC, 3D, Laser Controller
  ☆65Updated last year
• Duet3D / Duet3-Mainboard-6HC
  Hardware information for the Duet 3 Mainboard 6HC
  ☆47Updated 4 months ago
• Aus3D / MagneticEncoder
  ☆19Updated 8 years ago
• buildbotics / bbctrl-pcb
  Buildbotics CNC, 3D printer and other machine controller
  ☆49Updated 3 years ago
• Rack-Robotics / Powercore-V1.0-Firmware
  ☆35Updated 2 years ago
• bdring / Grbl_ESP32_Development_Controller
  A CNC controller to use and test Grbl_ESP32
  ☆79Updated 5 years ago
• hasenbanck / heteromycin
  A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC
  ☆40Updated 5 years ago
• mgineer85 / 0816-feeder-firmware
  Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.
  ☆36Updated 3 years ago
• ChrisWag91 / PI-LCNC
  Adapter board to use a Raspberry Pi as a Linux CNC controller
  ☆61Updated 3 years ago
• terjeio / GRBL_MPG_DRO_BoosterPack
  Tiva C BoosterPack for GRBL MPG/DRO
  ☆47Updated 10 months ago
• mawildoer / cycloidal_generator
  A cycloidal reduction drive generator script for Fusion360
  ☆121Updated 5 years ago
• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆83Updated last year
• SebG3D / TapePuller
  tape puller/remover for 0816 automatic feeder
  ☆21Updated 6 years ago
• drandrewthomas / ESP32_GRBL_CNC_Wireless_Pendant
  A wireless GRBL CNC pendant project based on the ESP32 micro-controller
  ☆54Updated 4 years ago
• xpix / XATC
  DIY CNC Automatic Toolchanger
  ☆70Updated 7 years ago
• avtehnik / gt2-gear-genaretor
  ☆37Updated 3 years ago
• bdring / 4_Axis_SPI_CNC
  4 Axis CNC Controller for Grbl_ESP32
  ☆69Updated 5 years ago
• Expatria-Technologies / PicoBOB
  Low-cost and simple GRBLHAL to MACH3 BOB bridge for Raspberry Pi Pico
  ☆27Updated 10 months ago
• buildbotics / bbctrl-firmware
  Buildbotics CNC Controller Firmware
  ☆73Updated 3 weeks ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 5 years ago
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆127Updated last month
• imrahil / smoothieware-webui
  Better webUI for Smoothieware
  ☆22Updated 9 years ago
• ottoragam / Tarocco
  Closed Loop Motor Controller
  ☆135Updated 4 years ago