Alternatives and similar repositories for am33x-cm3

Users that are interested in am33x-cm3 are comparing it to the libraries listed below

• chanakya-vc / PRU-I2C_SPI_master
  ☆23Updated 8 years ago
• dinuxbg / pru-gcc-examples
  Simple example projects for PRU-GCC
  ☆51Updated last month
• dwelch67 / stm32f4d
  ☆66Updated 9 years ago
• swetland / mdebug
  Debugger For Cortex-M MCUs (Linux & OSX)
  ☆26Updated 3 years ago
• zeekhuge / BeagleScope
  The official repositroy for BeagleScope project
  ☆43Updated 6 years ago
• antmicro / riscv-badge-hw
  RISC-V Electronic Badge open source hardware project
  ☆17Updated 2 years ago
• george-hopkins / esp8089-spi
  SPI kernel driver for ESP8089 devices
  ☆15Updated 10 years ago
• richardeoin / ftx-prog
  A Linux command-line alternative to the FTDI FTProg utility for FTDI's FT-X series
  ☆132Updated last year
• sony / openocd-nuttx
  Fork of OpenOCD with NuttX thread support.
  ☆24Updated 6 years ago
• tinyfpga / TinyFPGA-A-Programmer
  Low-cost (or free) programmer for TinyFPGA A-Series boards
  ☆41Updated 3 years ago
• mwelling / beagle-wire
  ICE40 FPGA Cape for Beaglebone
  ☆52Updated 5 years ago
• mwelling / pocketbone-kicad
  Smalls mint tin sized BeagleBone (KiCAD version)
  ☆58Updated 7 years ago
• microbuilder / LPC1114CodeBase
  Open Source SW Library for NXP's LPC1114 ARM Cortex M0 MCU
  ☆59Updated 12 years ago
• freecores / freecores.github.io
  Freecores website
  ☆19Updated 9 years ago
• ungureanuvladvictor / BBBlfs
  Flash your BeagleBone Black via USB
  ☆110Updated 7 years ago
• fnoble / gdb-regview
  Work with micro-controller special function register in gdb.
  ☆17Updated 8 years ago
• pantoniou / yamldt
  YAML DT tools
  ☆18Updated 8 years ago
• Wallacoloo / Raspberry-Pi-DMA-Example
  Simplest example of copying memory from one region to another using DMA in userland
  ☆93Updated 8 years ago
• jackmitch / libsoc
  libsoc: C library for interfacing with common SoC peripherals through generic kernel interfaces
  ☆158Updated last year
• WRansohoff / STM32F0_minimal_C
  Minimal code required to boot an STM32F0 chip into a C 'main' method.
  ☆29Updated 7 years ago
• maciejjo / beaglebone-pru-dma
  Beaglebone PRU DMA support
  ☆38Updated 6 years ago
• antmicro / zynq-mkbootimage
  An open source replacement of the Xilinx bootgen application.
  ☆112Updated last year
• ErichStyger / McuOnEclipse_PEx
  McuOnEclipse Processor Expert Source Files and Components
  ☆68Updated 11 months ago
• cyrozap / python-boundary-scan-tools
  Python tools to interact with boundary scan-capable devices. Useful for reverse engineering, testing, etc.
  ☆17Updated 9 years ago
• im-tomu / foboot
  Bootloader for Fomu
  ☆104Updated 2 years ago
• nxp-imx / imx-m4fwloader
  Tool for loading firmware to M4 core on i.MX6SX and 7D
  ☆22Updated 5 years ago
• bradfa / beaglebone_pinmux_tables
  BeagleBone pin multiplexing tables
  ☆37Updated 4 years ago
• shirriff / pru-blink
  Blink demo, showing how to use the PRU microcontroller on the PocketBeagle
  ☆11Updated 8 years ago
• smunaut / iua
  ice40 USB Analyzer
  ☆57Updated 5 years ago
• tinyfpga / TinyFPGA-EX
  Small, but powerful FPGA development board based on the Lattice ECP5.
  ☆75Updated 6 years ago