andypfau / rf_powermeter
RF powermeter with USB-interface
☆14Updated last year
Related projects ⓘ
Alternatives and complementary repositories for rf_powermeter
- Software GPS receiver for ESP32☆27Updated 8 months ago
- STM32 based SDR GPS receiver☆42Updated 7 months ago
- multi MAX2771 GNSS receiver☆23Updated this week
- DIY digital beamformer using ADALM-PLUTO☆68Updated 9 months ago
- Documentation of antsdr devices☆17Updated last year
- Notes on the QMTECH ZYNQ XC7Z020 starter kit☆9Updated this week
- This repo is a compilation of code and resources for multiple SDR Platforms as part of a phased array beamforming project.☆32Updated 6 months ago
- HDSDR ExtIO DLL for ADALM PLUTO☆14Updated 5 years ago
- Horus Binary v2 HAB Tracker☆32Updated this week
- Raspberry pi SDR tranceiver using lvgl gui☆55Updated last week
- This code allows a DJI Matrice-100 drone, equipped with a USRP-B205 mini SDR, to detect and move towards the source of a RF carrier trans…☆17Updated 7 years ago
- pluto-adsb-sim generates ADSB signal IQ data stream, which is then transmitted by the software-defined radio (SDR) platform ADALM-Pluto.☆21Updated 4 years ago
- Hands on labs for the ADALM Pluto SDR☆53Updated 2 years ago
- Tools and documentation to aid in modifying the ADI ADALM Pluto firmware☆31Updated 2 years ago
- This is budget Raspberry Pi SDR project.☆13Updated 3 years ago
- Remote Radio Unit - RF board☆43Updated 3 months ago
- ESP32 and DRA818V based VHF transceiver☆11Updated last year
- Electrosense hardware (downconverters)☆44Updated 3 years ago
- BR2_EXTERNAL framework for Analog Device's PlutoSDR Zynq☆35Updated last week
- Hardware extensions to the Radioberry Ham Radio☆17Updated 3 years ago
- Hairpin filter generator and openEMS model.☆18Updated 3 years ago
- MurPhySDR is an open source software-defined radio platform based on the AD9364 transceiver IC.☆13Updated 4 months ago
- Opensource, openhardware implementation of a Software Defined Radio (SDR) Ground Based Synthetic-Aperture RADAR (GB-SAR)☆31Updated 9 months ago
- Scripts for ADALM-Pluto device☆36Updated 4 years ago
- ☆11Updated 4 years ago
- LimeSDR Mini v2 Hardware Design☆27Updated 10 months ago
- Arduino port of the dAISy AIS project for si446x☆16Updated 6 years ago
- Main transceiver application☆29Updated 3 years ago
- MATLAB scripts for NanoVNA vector network analyzer. Connect, save S2P, display Logmag, Smith chart and TDR step response☆20Updated 5 years ago
- TInySA sources to create an Arduino version of the tinySA☆28Updated 4 years ago