amazfitbip / documentation
Collection of data sheet of internals component found in Amazfit bip
☆91Updated 5 years ago
Alternatives and similar repositories for documentation:
Users that are interested in documentation are comparing it to the libraries listed below
- Barebone FreeRTOS firmware for the Amazfit Bip☆39Updated 5 years ago
- Open source firmware for the SMA-Q2 smart watch☆67Updated 3 years ago
- stuff for Desay/MPOW DS-D6 nRF52832 bracelet☆167Updated 2 months ago
- ESP8266 firmware that implements the SWIM protocol for debug access / flashing of STM8 devices☆87Updated 5 months ago
- OSSW firmware for S120 2.0.0 softdevice☆43Updated 8 years ago
- Implement Texas flash protocol for CCxxxx chips.☆51Updated 6 years ago
- Barebone FreeRTOS firmware for the Amazfit Bip☆12Updated 3 years ago
- GPIO over usb board based on vusb AVR stack☆18Updated last year
- Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…☆57Updated 11 years ago
- DFU bootloader for STM32F103, for use with any F103 code and target☆30Updated 8 years ago
- USB Keyboard Adapter for old ThinkPad keyboards☆36Updated 7 years ago
- Library for BipOS (Amazfit Bip FW MOD)☆63Updated 3 years ago
- In application debugger for ARM Cortex microcontrollers.☆28Updated 4 months ago
- An OpenSource Soldering Iron☆19Updated 7 years ago
- Alternative programmer for TLSR8269☆65Updated 7 months ago
- Smartwatch variants for sandeepmistry's Nordic Semiconductor nRF5 core☆62Updated 5 years ago
- Autonomous wireless sensor/actuator node using bluetooth modules based on CSR BlueCore chipset. See wiki for more info.☆153Updated 6 years ago
- Alternative firmware for USB powered soldering iron ZD-20U.☆61Updated 2 years ago
- Open-source (GPL) STM32F373C8T6 based vaping mod, up to 140W, to use with LiPo 2S 500 mAh☆35Updated 7 years ago
- id205l firmware for espruino☆33Updated 2 years ago
- OpenOCD fork with blackmagic HLA support. Allows using blackmagic probe for debugging using OpenOCD.☆14Updated 4 years ago
- KiCAD PCB panelization helper☆30Updated 3 years ago
- Cortex M3 hardware descriptions, library software, and some applications for ST and GD F103 platforms☆39Updated 7 years ago
- Smart Battery System for ESP☆73Updated 6 years ago
- Flash firmware to STM32 microcontrollers using Python.☆114Updated 5 months ago
- CMSIS-DAP USB-SWD/JTAG adapter firmware for Pro Micro and Teensy 3.2 boards☆88Updated last year
- Buck boost regulator module that supports 3.5V-24V input, charging 1-4 cell batteries, and programmable USB OTG output from 4.48V to 20.8…☆15Updated 4 years ago
- ST-Link dumper firmware☆52Updated 7 months ago
- Internet Connected or Standard Input EPaper Display☆79Updated 7 years ago
- Arduino module RTL8195/8711/8710Ax☆74Updated 7 years ago