Alternatives and similar repositories for ios-car-dashboard

Users that are interested in ios-car-dashboard are comparing it to the libraries listed below

• alexandreblin / arduino-peugeot-can
  Arduino sketch to retrieve data from a Peugeot's CAN bus
  ☆99Updated 8 years ago
• alexandreblin / arduino-can-reader
  An Arduino sketch to read data from a CAN bus
  ☆96Updated 6 years ago
• alexandreblin / python-can-monitor
  A Python script to display data from a CAN bus
  ☆255Updated 6 years ago
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆111Updated 4 years ago
• mickeyl / LTSupportAutomotive
  An iOS / watchOS / macOS support library for OBD2, VIN-Decoding, and more.
  ☆242Updated last year
• Knio / carhack
  Automotive data aquisition, logging, diagnostics, and visualization project. Focusing on CAN-bus and the Nissan 370Z
  ☆79Updated 9 years ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆85Updated 10 years ago
• autowp / autowp.github.io
  Peugeot Citroën CAN bus
  ☆89Updated 2 years ago
• seishuku / teensycanbusdisplay
  Jetta TDI aux display
  ☆18Updated 5 years ago
• Alfaa123 / Volvo-CAN-Gauge
  Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
  ☆114Updated 3 years ago
• morcibacsi / PSASteeringWheelAdapter
  ESP32 based steering wheel adapter for Peugeot and Citroen cars
  ☆36Updated 5 years ago
• I-CAN-hack / pq-flasher
  This repository conatains tools to reflash a PQ35 VW EPS, it also contains some useful libraries to deal with the TP 2.0 transport layer …
  ☆128Updated last year
• prototux / PSA-RE
  PSA (Peugeot/Citroen/DS) electronics architecture reverse engineering.
  ☆85Updated 2 months ago
• mnaberez / vwradio
  Reverse engineering Volkswagen car radios
  ☆107Updated 6 months ago
• macchina / m2-hardware
  Designs for the Macchina M2
  ☆93Updated 5 years ago
• baconwaifu / PyVCDS
  An attempt at re-implementing VCDS in python and socketCAN, using publicly available information and black-box reverse engineering.
  ☆94Updated last year
• openvehicles / CAN-RE-Tool
  A reverse engineering tool for systems based on CAN bus communications
  ☆83Updated 4 years ago
• ludwig-v / arduino-psa-comfort-can-adapter
  Arduino sketch to operate new PSA/Stellantis (Peugeot, Citroen, DS, Opel) comfort devices (CAN2010) on old BSI CAN-BUS (CAN2004)
  ☆66Updated 2 months ago
• morcibacsi / PSAWifiDisplayControl
  A simple WiFi portal to control the display in your Peugeot or Citroen if you remove the factory installed head unit
  ☆32Updated 4 years ago
• LuukEsselbrugge / Volve
  Volvo CAN BUS extender based on ESP32
  ☆99Updated 4 years ago
• danielkucera / esp32-can
  ☆32Updated 2 years ago
• zapta / linbus
  An Arduino based LINBUS stack and signal interceptor/injector.
  ☆195Updated 6 years ago
• macchina / OBD2-TEST-BOARD-hardware
  ☆12Updated 5 years ago
• tomaskovacik / VAGRadioRemote
  arduino library for remote controling V.A.G. radios
  ☆11Updated 4 years ago
• mrfixpl / MQB-sniffer
  CAN-BUS sniffing for Volkswagen Golf MK7 (and most likely other MQB platform cars)
  ☆78Updated 2 years ago
• rnd-ash / Macchina-J2534
  J2534 drivers for various Macchina hardware
  ☆101Updated 3 years ago
• hackingvolvo / SardineCAN-Win32
  Win32 DLL for Sardine CAN (Open Source J2534 device)
  ☆53Updated 10 years ago
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆104Updated 6 years ago
• MEAT-Inc / Fulcrum
  Fulcrum is the ultimate J2534 DLL Shim written in C++ which is able to pipe data out from the native calls to any other location for supe…
  ☆33Updated 7 months ago
• spoofcid / spoofcid
  SpoofCID is an microSD to SD adapter with builtin functionality do swap Card Identification Number. It allows to use any user microSD car…
  ☆49Updated 7 years ago