Alternatives and similar repositories for W203-canbus

Users that are interested in W203-canbus are comparing it to the libraries listed below

• rnd-ash / MBUX-Port
  Custom Infotainment UI for older Mercedes vehicles (2000-2007), inspired loosely by the 2021 S Class MBUX UI
  ☆151Updated 2 years ago
• mrfixpl / MQB-sniffer
  CAN-BUS sniffing for Volkswagen Golf MK7 (and most likely other MQB platform cars)
  ☆78Updated 2 years ago
• rnd-ash / mercedes-hacking-docs
  Documents on hacking and reverse engineering Mercedes vehicles
  ☆216Updated 4 years ago
• HeinrichG-V12 / E65_ReverseEngineering
  ☆43Updated 3 years ago
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆116Updated 10 months ago
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆112Updated 4 years ago
• LuukEsselbrugge / Volve
  Volvo CAN BUS extender based on ESP32
  ☆98Updated 4 years ago
• baconwaifu / PyVCDS
  An attempt at re-implementing VCDS in python and socketCAN, using publicly available information and black-box reverse engineering.
  ☆92Updated last year
• Alfaa123 / Volvo-CAN-Gauge
  Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
  ☆113Updated 3 years ago
• piersholt / wilhelm-docs
  BMW I/K-Bus Documentation
  ☆110Updated 6 months ago
• angelovAlex / can-bus-w211
  ☆38Updated 8 years ago
• kmalinich / node-bmw-ref
  BMW CANBUS/DBUS/IBUS/KBUS information/reference/examples
  ☆58Updated 6 years ago
• morcibacsi / PSASteeringWheelAdapter
  ESP32 based steering wheel adapter for Peugeot and Citroen cars
  ☆36Updated 5 years ago
• adamforbes92 / FISCuntrol
  FIS Control for the masses.
  ☆48Updated 7 years ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆84Updated 10 years ago
• ibanezgomez / FISBlocks
  Device based on Arduino to play with VAG KWP1281
  ☆119Updated 7 years ago
• iwanders / OBD9141
  A class to read an ISO 9141-2 port found in car diagnostic OBD-II ports.
  ☆289Updated 4 months ago
• laurynas / volvo_linbus
  Volvo LIN bus reader
  ☆93Updated 4 years ago
• alexandreblin / arduino-can-reader
  An Arduino sketch to read data from a CAN bus
  ☆96Updated 6 years ago
• rnd-ash / Macchina-J2534
  J2534 drivers for various Macchina hardware
  ☆100Updated 2 years ago
• pavelmalik / BMWCanBridge
  Arduino Due solution for adding vin-coded modules to BMW cars
  ☆58Updated 6 years ago
• smartgauges / canbox
  Firmware for canbus boxes
  ☆103Updated 3 weeks ago
• aster94 / Keyword-Protocol-2000
  The KWP2000 is a communications protocol used for on-board vehicle diagnostics systems (OBD) by Suzuki (SDS), Kawasaki (KDS), Yamaha (YDS…
  ☆263Updated 2 years ago
• an-ven / VW-Instrument-Cluster-Controller
  Arduino and MCP2515 CAN bus VW Instrument Cluster Controller
  ☆44Updated last year
• janimm / RealDash-extras
  RealDash examples and technical materials
  ☆148Updated 2 weeks ago
• tsharp42 / E46ClusterDriver
  An Arduino sketch and schematic for the hardware to drive a BMW instrument cluster over CAN-BUS, KBUS and general IO lines. The firmware …
  ☆37Updated 9 years ago
• I-CAN-hack / pq-flasher
  This repository conatains tools to reflash a PQ35 VW EPS, it also contains some useful libraries to deal with the TP 2.0 transport layer …
  ☆127Updated last year
• ludwig-v / arduino-psa-comfort-can-adapter
  Arduino sketch to operate new PSA/Stellantis (Peugeot, Citroen, DS, Opel) comfort devices (CAN2010) on old BSI CAN-BUS (CAN2004)
  ☆66Updated last month
• autowp / arduino-canhacker
  CanHacker (lawicel) CAN adapter on Arduino + MCP2515
  ☆431Updated last year
• turboat / eepromtool
  ☆50Updated 2 years ago