Alternatives and similar repositories for Rotaped:

Users that are interested in Rotaped are comparing it to the libraries listed below

• e-tinkers / TinyReflowControllerV3
  The code and schematic used for reconfiguring a UYue 946-1010 Preheater as a solder reflow hot plate.
  ☆16Updated 10 months ago
• XRobots / BarcodeSynth
  ☆9Updated 4 years ago
• XRobots / ControlMomentGyros
  ☆30Updated 3 years ago
• mnesarco / HyperController
  8DOF Space Controller Device for FreeCAD
  ☆32Updated 4 years ago
• moonglow / flashforge_firmware_tool
  FlashForge firmware tool allow you to decrypt and encrypt firmwares from FlashForge 3D printers, Dremel 3D20 and PowerSpec Ultra 3D
  ☆36Updated 2 years ago
• roTechnic / internalECGears
  ☆22Updated 3 years ago
• technoez / open-makers-cube
  An open source portable desktop-sized electronics workstation.
  ☆39Updated 5 years ago
• DrLex0 / print3D-customizable-sieve
  3D Print - Parametric sieve / filter / strainer
  ☆28Updated last year
• ZackFreedman / THUNDER-FINGER
  Feel electric current... with your finger.
  ☆23Updated 4 years ago
• mitxela / scaffold
  ☆21Updated last year
• IRNAS / GoodEnoughCNC-PlasmaCutter
  GoodEnoughCNC Hybrid (Plasma, Mill) - very low cost and simple, suitable for everyone
  ☆77Updated 5 years ago
• rahulsarchive / 4AxisFoamCutter
  An open-source DIY 4 Axis Foam cutter using Ramps + Arduino for cutting RC Wing Cores.
  ☆84Updated 3 years ago
• amcchord / MegaBrush
  Brushed motor firmware for Brushless ESCs
  ☆28Updated 4 years ago
• MrGreensWorkshop / RasPiPicoSDK_PicoDRO
  PicoDRO, DIY digital readout with the Raspberry Pi Pico
  ☆16Updated last year
• bondus / CanSerial
  Serial port emulation over CAN bus
  ☆9Updated 4 years ago
• daveydaid / Stewart-Platform-Head-Massager
  Stewart-Gough Platform utilising Dynamixel servo motors. Control loop and simulation handled by PC side, sending control information to A…
  ☆11Updated 2 years ago
• terjeio / CNC_Boosterpack
  A BoosterPack that provides 3-axis motor support for some TI LaunchPads
  ☆13Updated 3 years ago
• ToneCrafter-Team / ToneCrafter
  HW+SW project aiming to provide guitarists with audio effects generated from a music file
  ☆13Updated 3 years ago
• bobricius / Low-cost-Augmented-Reality
  Optimized for use microcontrollers and SPI displays popular ST7789 1.3" IPS 240x240 FEEL LIKE IRON MAN !!!!!
  ☆9Updated 3 years ago
• spegelius / Dollo
  a fully printed 3D printer
  ☆14Updated 4 months ago
• wesc23 / CroXY
  ☆22Updated 4 years ago
• ryanayoung / projectSpigot
  ☆30Updated 4 years ago
• fieldOfView / Cura-PauseBackendPlugin
  A plugin to pause autoslicing in Cura
  ☆10Updated 2 years ago
• rosmo-robot / Open-Core-M5stack
  Adapter for ESP32-Dev-C & M5stack modules
  ☆12Updated 2 years ago
• apertus-open-source-cinema / axiom-micro-mainboard
  axiom micro mainboard containing the cmos sensor, headers for plugin modules and more
  ☆37Updated 4 years ago
• ReikaKalseki / EndgameCombat
  A mod to add much more powerful endgame weaponry and defences, to stand up to mods like Natural Evolution and DyTech.
  ☆11Updated last year
• robots / ols-fwloader
  Bootloader tool for OLS
  ☆22Updated 8 years ago
• Aus3D / RUMBA32
  A powerful 32-bit 3D printer control board.
  ☆71Updated 4 years ago
• felixstorm / Creality_Ender_3_ESP32_Board
  ☆55Updated 3 years ago
• DIY-Inkjet-Printers / DIY_Inkjet_Printer
  ☆24Updated 9 months ago