WillDonaldson / Robotic-Arm-initial-prototype

Related projects ⓘ

Alternatives and complementary repositories for Robotic-Arm-initial-prototype

• OpenBionics / Anthropomorphic-Robot-Hands
  Anthropomorphic, adaptive robot hands
  ☆53Updated 4 years ago
• 4ndreas / MantisRover
  CAD files for the Mantis Rover Project - 3D printed mecanum wheel rover.
  ☆16Updated 5 years ago
• OpenBionics / Prosthetic-Hands
  Affordable (< 200$), light-weight (< 300 gr), anthropomorphic prosthetic hands, using a novel selectively-lockable differential mechanism
  ☆141Updated 6 years ago
• MyRobotLab / InMoov
  inmoov repo
  ☆93Updated 3 years ago
• ftobler / robotArm
  Software for a 3D Printed Robot Arm
  ☆123Updated 4 years ago
• Toglefritz / Bertram_Robot_Arm
  This repository contains the bill of materials, design files, and firmware for building a giant 3D printed robot arm.
  ☆63Updated 5 years ago
• DreamingRaven / RavenSLA
  Open-source, SLA 3D printing, for biomimetic prototyping.
  ☆17Updated 6 years ago
• OpenBionics / Robot-Hands
  Affordable (< 100$), light-weight (< 200 gr), adaptive, underactuated robot hands
  ☆124Updated 9 years ago
• ikkalebob / NM-bionic-hand
  ☆329Updated 4 years ago
• roTechnic / Robot-Arm
  ☆62Updated 5 months ago
• 4ndreas / BetaBots-Robot-Arm-Project
  3d printable Robot arm
  ☆344Updated 3 years ago
• jhaupt / nz1_python
  Examples for controlling the NearZero brushless motor controller from a single-board computer
  ☆13Updated 4 years ago
• PCrnjak / CM6_COBOT_ROBOT
  Files and intro page for first version of CM6 COBOT robotic arm
  ☆167Updated 4 months ago
• cansik / smooth-servo
  An processing library for smooth servo control.
  ☆23Updated 6 years ago
• byDagor / Janus-Controller
  The Janus Controller is a Brushless motor driver with an on-board magnetic encoder, a three-phase MOSFET driver, three MOSFET half-bridge…
  ☆116Updated 3 years ago
• JoLamMaker / ThisArm_Firmware
  G-code enabled firmware for Robot Arms
  ☆30Updated 2 years ago
• PCrnjak / Faze4-Robotic-arm
  All files for 6 axis robot arm with cycloidal gearboxes .
  ☆605Updated 7 months ago
• Neumi / tmc2209_devboard
  An Arduino shield to test the TMC2209 stepper motion controller by Trinamic.
  ☆31Updated last year
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 7 years ago
• AliShug / EvoArm
  An open-source 3D-printable robotic arm
  ☆138Updated 5 years ago
• NiryoRobotics / niryo_one
  ☆366Updated 4 years ago
• OpenBionics / Body-Powered-Exoskeleton-Glove
  Body-powered, Tendon-Driven, Wearable Exoskeleton Glove for Grasping Capabilities Enhancement
  ☆33Updated 4 years ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆88Updated 6 years ago
• CGrassin / 3d_lidar
  This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.
  ☆67Updated last year
• jochenalt / Walter
  6DOF Industrial Robot, vintage style
  ☆139Updated 7 years ago
• BCN3D / BCN3DSigma-Mechanics
  All the mechanics of the BCN3D Sigma 3D Printer.
  ☆99Updated 6 years ago
• XRobots / RobotX
  All the things for RobotX
  ☆125Updated 6 years ago
• Hecatron-Cad / Cad.Solidworks.Parts
  General Solidworks Parts for use in design
  ☆20Updated 7 months ago
• andreasbastian / openSLS
  OpenSLS: An Open Source Selective Laser Sintering Platform
  ☆64Updated 10 years ago
• NiryoRobotics / niryo_one_ros
  Niryo One ROS stack
  ☆239Updated last year