WeActStudio / WeActStudio.WchLinkWLinks
WCH-LinkW is a wired/wireless 2.4G dual imitation real debugger, which can be used for online debugging and downloading of WCH RISC-V architecture MCU and also for online debugging and downloading of ARM chips with SWD/JTAG interface.
☆24Updated 2 years ago
Alternatives and similar repositories for WeActStudio.WchLinkW
Users that are interested in WeActStudio.WchLinkW are comparing it to the libraries listed below
Sorting:
- STM32H7B0VBT6 Core Board 280Mhz,128KB ROM,1.4M SRAM☆17Updated 3 years ago
- CH32V003F4U6 Core Board☆32Updated last year
- CH340, CH343, CH342, CH344,CH348☆36Updated 2 years ago
- STM32H562RGT6 Core Board☆23Updated 11 months ago
- CH551 to CH554 One Click SDCC Compiler☆24Updated 4 years ago
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆48Updated 4 years ago
- CMSIS-DAP compliant debugging probe with SWD, JTAG, and VCP support☆38Updated 5 months ago
- A mini USB to serial port with DTR and RTS, 6Mbps maximum speed☆23Updated 3 years ago
- ☆24Updated 2 years ago
- WeAct_HID_Bootloader_F4x1 base on STM32_HID_Bootloader☆43Updated 5 years ago
- In application debugger for ARM Cortex microcontrollers.☆32Updated 8 years ago
- 8051 microcontroller☆40Updated 8 years ago
- ☆33Updated last year
- Deprecated, use 'wlink' instead. Command line tool to switch WCH-LinkE modes between DAP and RV from host.☆10Updated last year
- A CircuitPython RPN Calculator☆12Updated 4 months ago
- Custom bootloader that allows firmware updates to Raspberry Pi Pico via UART/I2C/SPI.☆33Updated 3 weeks ago
- USB-C 1-60V Current and Voltage Controlled Power Supply☆18Updated 4 years ago
- WCHlink module can be used for online debugging and downloading of qinheng risc-v architecture MCU, and also for online debugging and do…☆14Updated 3 years ago
- BlackPill Core Board AT32F403ACGx(240Mhz,96kRAM/1024kROM)☆57Updated 3 years ago
- BluePill+ GD32 Series, GD32F103CBT6☆11Updated 3 years ago
- OpenMV Camera Module☆10Updated 2 years ago
- An Open-Source CMSIS-DAP Debug Probe based on DAPLink and USB bus convert and it can realize USB convert to serial interface based in CH5…☆95Updated last year
- esp32 wifi debugger for ARM Cortex microcontrollers https://github.com/blacksphere/blackmagic☆100Updated 6 months ago
- Hardware of Jasper's Electronic Load R2☆22Updated 7 years ago
- RV-Link: In application debugger for RISC-V micro-controllers, RISC-V emulator, running on RISC-V development boards (e.g. Sipeed Longan …☆31Updated 4 years ago
- ST-Link dumper firmware☆53Updated last year
- Arduino style API for GD32 F1, GD32F3, GD32VF1, CH32F1, CH32V30x and STM32F1, FreeRTOS and Cmake build system included. Some rust was add…☆12Updated this week
- ESC(Electronic Speed Controller) source code based on RISC-V CH32☆38Updated 2 years ago
- ☆27Updated 7 years ago
- ☆54Updated last year