Victor-Mo / IRT-ESPLinks
Nefit / Buderus iRT protocol encoder / decoder for ESP8266
☆22Updated 4 years ago
Alternatives and similar repositories for IRT-ESP
Users that are interested in IRT-ESP are comparing it to the libraries listed below
Sorting:
- Readout of EMS protocol datagrams and transfer of data to Domoticz via Arduino☆90Updated 4 years ago
- This library provides functions to communicate through the EMS Bus with Buderus/Nefit/Worcester (or any other EMS Bus compatible) boilers…☆17Updated 7 years ago
- A ESP8266 devkit firmware for the Nodoshop version of the Opentherm Gateway (OTGW)☆158Updated 3 weeks ago
- ESP8266 firmware to read and control EMS and Heatronic compatible equipment such as boilers, thermostats, solar modules, and heat pumps☆312Updated 4 years ago
- Buderus Logamatic EMS and EMS+/EMS Plus bus Wiki for Bosch, Buderus, Nefit, Junkers, Worcester devices☆49Updated 4 years ago
- Control Hörmann doors directly via MQTT☆123Updated 2 months ago
- MQTT Client that publishes data from Volkswagen WeConnect☆78Updated 8 months ago
- ESP8266 gateway between RFLink and MQTT server☆102Updated 3 years ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆93Updated this week
- Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)☆157Updated last year
- A reliable ESP8266 application to read out data from (swedish) COSEM/DLMS based smart meters using OBIS code/structure.☆45Updated last year
- dsmr 4.2 P1 meter to mqtt using esp8266 nodemcu☆68Updated 4 years ago
- A smartmeter project, made for ESPHome (hardware + ESPHome config)☆81Updated last year
- ESPHome Modbus Server component☆45Updated 2 years ago
- Arduino library and hardware shield to send and receive data from Opentherm devices☆178Updated 2 years ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆110Updated 4 years ago
- Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE, enhanced with I2C options☆123Updated 2 months ago
- Information collected about Sungrow Invter, focusing on SG7.0RT with WiNet-S Dongle☆41Updated 3 months ago
- ESPHome component to read out DLMS smart meters via M-Bus☆118Updated last year
- ESP8266/ESP32 decrypts wireless MBus frames from a Multical21 water meter☆109Updated last year
- Custom EspHome sensor for reading P1 port on dutch smart meters with ESP module for Home Assistant☆63Updated 3 years ago
- ESP8266 based logger for GoodWe inverters. Can upload to pvoutput and publishes MQTT topics☆97Updated 2 years ago
- emulates Hoermann HAP 1 HCP (HCP2) on ESP8622, ESP32 and Arduino.☆99Updated 4 years ago
- Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU☆57Updated 3 years ago
- PCB and housing for ESPHome integration with Kamstrup Multical 403 meter☆36Updated last year
- RFLink for ESP, with MQTT client☆170Updated 5 months ago
- ESPHome component to monitor a Solax X1 mini via RS485☆40Updated 3 months ago
- An ESP32 based 8 channels motor controller (to replace Homematic IP Floor Heating Actuator)☆109Updated 3 months ago
- Home Assistant customcomponent for SunSpec modbus devices☆77Updated 2 weeks ago
- ESPHome Component for Daikin Mini-Splits using the S21 serial port.☆94Updated 4 months ago