danimaciasperea / Calduino
This library provides functions to communicate through the EMS Bus with Buderus/Nefit/Worcester (or any other EMS Bus compatible) boilers. Includes commands for both getting status information (UBA Monitor, DHW Monitor, etc.) and setting new configurations (Set Day/Night Temperature, Set Working Mode, etc.).
☆17Updated 6 years ago
Alternatives and similar repositories for Calduino:
Users that are interested in Calduino are comparing it to the libraries listed below
- Readout of EMS protocol datagrams and transfer of data to Domoticz via Arduino☆89Updated 3 years ago
- Arduino library to control non-smart roller shutters using time☆60Updated 4 years ago
- My personal Workspace for Mysensors HW☆34Updated 4 years ago
- ESPHome component to monitor a Solax X1 mini via RS485☆39Updated 6 months ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆109Updated 3 years ago
- ESP32 - ITHO diagnostic port interface☆10Updated 2 months ago
- Bridge from RFLink to an mqtt broker using ESP8266 programmed with arduino IDE☆38Updated 6 years ago
- Nefit / Buderus iRT protocol encoder / decoder for ESP8266☆23Updated 4 years ago
- Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE, enhanced with I2C options☆126Updated 2 months ago
- esp8266, serial bus to mqtt for Paradox alarm systems☆81Updated 2 years ago
- Homie4 for Zehnder ComfoAirQ☆19Updated 2 years ago
- ESP8266 based logger for GoodWe inverters. Can upload to pvoutput and publishes MQTT topics☆97Updated last year
- MQTT Support for RFLink Gateway (http://www.nemcon.nl/blog2) project☆36Updated last year
- esp8266 IoT to mqtt bridge. Eastron SDM220, SDM230, SDM630 modbus; AZ7798; SenseAir s8; BME280; HDC1080; Plantower PMS5003, PMS7003, PMSA…☆20Updated 2 years ago
- Irrigation controller using Openhab and the ESP8266 module☆22Updated 8 years ago
- reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)☆251Updated 6 months ago
- Somfy ESP8266 Remote 433.24 RTS☆44Updated 5 years ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆81Updated 3 weeks ago
- ESP8266 based wind anemometer project☆33Updated 5 years ago
- A reliable ESP8266 application to read out data from (swedish) COSEM/DLMS based smart meters using OBIS code/structure.☆45Updated 9 months ago
- emulates Hoermann HAP 1 HCP (HCP2) on ESP8622, ESP32 and Arduino.☆92Updated 3 years ago
- MQTT discovery plugin for Domoticz☆40Updated last year
- ESPHome support for cheap WiFi PIR sensors☆67Updated 3 years ago
- dsmr 4.2 P1 meter to mqtt using esp8266 nodemcu☆69Updated 3 years ago
- Software for the ESP8266 that sends P1 smart meter data to Domoticz (with CRC checking)☆83Updated 6 years ago
- Software for the ESP8266 that sends P1 smart meter data to MQTT (without CRC checking)☆22Updated 6 years ago
- read/control DS18B20/DHT/IR/Relay from and to Pimatic on ESP8266☆35Updated 7 years ago
- Buderus Logamatic EMS and EMS+/EMS Plus bus Wiki for Bosch, Buderus, Nefit, Junkers, Worcester devices☆45Updated 3 years ago
- Esphome configuration for Somfy Blind☆31Updated 3 years ago
- Esphome custom component for SDM energy meters☆13Updated 2 years ago