Alternatives and similar repositories for firmware_v3

Users that are interested in firmware_v3 are comparing it to the libraries listed below

• UBC-Solar / firmware-v2
  Firmware for second generation of UBC Solar's car
  ☆11Updated last year
• DailyDuino / STM32-CAN-bus-example-rx-tx
  STM32 CAN bus example
  ☆40Updated 4 years ago
• fzxhub / can_tp
  这是一个C编写的基于CAN的ISO-TP(ISO15765-2)。框架分层严格、与平台无关、可配置、可裁剪。
  ☆15Updated 2 years ago
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆28Updated this week
• UBCFormulaElectric / Consolidated-Firmware
  A consolidated repository for gathering all software under one roof.
  ☆23Updated this week
• FARLY7 / xcan-router
  A CAN Gateway framework, offering CAN frame-based routing across multiple interfaces and protocols.
  ☆13Updated 4 years ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆38Updated 5 years ago
• lonkamikaze / hsk-libs
  High Speed Karlsruhe XC878 µC libraries
  ☆31Updated 4 years ago
• Da-Vinci-Engineering / openAUTOSAR
  This repository contains the contribution of an "AUTOSAR Classic Playground" from Da Vinci Engineering GmbH to the open-source community.…
  ☆52Updated 2 years ago
• davefiddes / c2000-inverter
  Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.
  ☆15Updated 2 years ago
• SimonCahill / isotp-c
  An implementation of the ISO-TP (ISO15765-2) CAN protocol in C
  ☆34Updated 3 weeks ago
• microchip-pic-avr-examples / pic24-dspic-can-canfd-bootloader
  CAN and CAN-FD bootloader example using the ISO-15765-2 CAN transport layer for the PIC24 and dsPIC product lines.
  ☆20Updated last year
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆76Updated 8 years ago
• open-LIN / open-LIN-c
  Implementation of Local interconnect network in c
  ☆75Updated 2 weeks ago
• DanielMartensson / Easy-CANopen
  A CANopen protocol for all systems such as embedded, PC, etc.
  ☆107Updated last year
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆46Updated 3 years ago
• LittleBasdart / UdsBootloader
  UDS bootloader based on CHARON UDS stack by Sentinel Software GmbH
  ☆25Updated 2 years ago
• Anyc-Qing / AUTOSAR
  ☆32Updated 5 years ago
• moonglow / vector_can
  Vector VN1610 protocol implementation for cheap STM32F4 hardware
  ☆48Updated 2 years ago
• sebastianwilczek / CANoe-Configurations
  ☆31Updated 5 years ago
• Danaozhong / AUTOSAR-CAN-Driver-for-STM32
  A CMake/C++ implementation of the AUTOSAR Classic Can/CanIf Module for the STM32 Microcontroller. Only supports STM32F3 controllers.
  ☆11Updated 4 years ago
• lotusczp / Lobster
  Lobster is a PC tool designed mainly for measurement, calibration, debugging of embedded system.
  ☆21Updated 3 years ago
• DanielMartensson / GoobySoft
  General software for logging and controlling devices. Controlling Modbus, CAN bus via STM32PLC etc
  ☆34Updated last week
• dweggg / Inverter
  SiC based, dual 80kW (2x40kW), 600V, 3 phase traction inverter with FOC
  ☆22Updated 9 months ago
• 107-systems / 107-Arduino-MCP2515
  Arduino library for controlling the MCP2515 in order to receive/transmit CAN frames.
  ☆94Updated 3 months ago
• uCAN-LIN / LinUSBConverter
  LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.
  ☆78Updated 2 years ago
• htibosch / freertos_plus_projects
  FreeRTOS sample projects using +TCP and/or +FAT
  ☆26Updated last month
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆64Updated 2 months ago
• Sauci / CanTp
  Implementation of the CanTp module (ISO 15765-2), according to AUTOSAR specification v4.4.0
  ☆62Updated 2 months ago
• anandman / functional-safety
  ISO 26262 Functional Safety Documents
  ☆40Updated 6 years ago