Ttl / fmcw3
Two RX-channel 6 GHz FMCW radar design files
☆231Updated last year
Alternatives and similar repositories for fmcw3:
Users that are interested in fmcw3 are comparing it to the libraries listed below
- FMCW radar design files☆181Updated 8 years ago
- FMCW radar design files☆154Updated 8 years ago
- Second version of homemade 30 MHz - 6 GHz VNA☆212Updated 6 years ago
- A simple, low-power, low-cost 5.8-6.0 GHz microwave FMCW radar☆107Updated 10 years ago
- ☆183Updated 7 years ago
- 10 GHz Phased Array beamforming labs☆128Updated 4 years ago
- 6GHz frequency-modulated continuous-wave radar with real-time range detection☆38Updated 4 years ago
- Under development open hardware microwave vector network analyzer☆188Updated last year
- GNU Radio Radar Toolbox☆243Updated 8 months ago
- Python interfaces for ADI hardware with IIO drivers (aka peyote)☆153Updated this week
- A Software GPS decoder, going from raw 1-bit ADC samples to position fix☆159Updated 5 years ago
- High-level python interface to OpenEMS with automatic mesh generation☆85Updated 5 months ago
- Radar using Red Pitaya for RF: using Raspberry Pi 3 for quad-core radar signal processing☆71Updated 3 years ago
- a simple and cheap vector network analyzer, including support software☆158Updated 4 years ago
- A Python wrapper to the OpenEMS FDTD solver with Kicad footprint generation☆84Updated 7 months ago
- Software Defined Radar with GNURadio Companion☆68Updated 6 years ago
- Enable your Pluto SDR to become a stand-alone OFDM transceiver with batman-adv mesh network routing capabilities☆110Updated 4 years ago
- Python based package for phased array antenna design and analysis☆139Updated 7 years ago
- AD9361 based USB3 SDR☆100Updated 7 years ago
- Antenna array analysis tool built with Python.☆37Updated 2 years ago
- A simple GUI tool for antenna array analysis☆140Updated 2 years ago
- MATLAB toolbox for ADI transceiver products☆59Updated 3 weeks ago
- First SDR platform for IoT networks☆173Updated last year
- Documentation for the Lime Microsystems second generation transceiver IC☆98Updated 4 years ago
- 4 port eCal module☆68Updated last month
- IIO blocks for GNU Radio☆97Updated last year
- DIY digital beamformer using ADALM-PLUTO☆72Updated 11 months ago
- Wideband front-end digitizer for GPS, GLONASS, Galileo, BeiDou☆58Updated 5 months ago
- ☆215Updated last year
- Companion software for Introduction to Radar Using Python and MATLAB☆141Updated 9 months ago