Alternatives and similar repositories for node-drone-joystick

Users that are interested in node-drone-joystick are comparing it to the libraries listed below

• subpos / esp_firmware
  ☆12Updated 9 years ago
• baldengineer / Raspberry-Pi-Soft-Power-Controller
  Originally intended to be a controller for a RetroPie. A soft power controller that allows for Raspberry Pi proper shutdown. Intention is…
  ☆22Updated 8 years ago
• ccadic / 4.3inch-E-paper-Office-Sign
  ESP8266 & 4.3inch e-paper combination to make office's door sign
  ☆20Updated 8 years ago
• subpos / subpos_node
  ☆24Updated 9 years ago
• idlehandsdev / thePIDDYBOT
  PIDDYBOT is an Open Source Balancing Robot with the aim of teaching PID control.
  ☆43Updated 8 years ago
• arielnh56 / SonarI2C
  Arduino library supports many HC-SR04 sensors via I2C bus and hardware interrupt
  ☆27Updated 8 years ago
• ExploreEmbedded / Hornbill-ESP32-DEV
  ☆27Updated 8 years ago
• orionmsx / OttoCalTool
  Otto's Calibration Tool
  ☆12Updated 2 years ago
• gregdavill / gpsLoggerLora
  ☆21Updated 6 years ago
• pierre-muth / pilogger
  Home logging station
  ☆12Updated 4 years ago
• robert-hh / K210-Stuff
  Various file for the Sipeed MaixPy K210
  ☆12Updated 6 years ago
• squix78 / esp32-docker-buildbox
  Docker Buildbox for the ESP8266 WiFi chip
  ☆15Updated 9 years ago
• roberttidey / IRBlasterWeb
  Infra Red Remote Blaster using esp8266 including bit bang libraries
  ☆11Updated last year
• StrawsonDesign / EduMiP
  ☆28Updated 8 years ago
• AIWintermuteAI / maixpy-openmv-demos
  Codes and micropython binary for Sipeed MaiX Bit OpenMV demos
  ☆18Updated last year
• gvJaime / microspot
  3D printable - DIY microscope
  ☆14Updated 6 years ago
• Nurgak / Internet-of-Things-Power-Meter
  Device to view household power consumption
  ☆37Updated 7 years ago
• adafruit / Adafruit-FONA-800-GSM-Breakout-PCB
  PCB files for the Adafruit FONA 800 GSM Cellular Breakout
  ☆14Updated 4 years ago
• AnalogLamb / esp32
  Every thing about ESP32
  ☆22Updated 7 years ago
• sparkfun / ESP8266_Thing
  A breakout and development board for the ESP8266 WiFi SoC.
  ☆42Updated 5 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• richard-sim / openpnp-linear-rails
  An OpenPnP compatible SMT pick and place machine with linear rails based on Anthony Webb's build on hackaday.io.
  ☆13Updated 9 years ago
• wdim0 / esp8266_with_KeDei_lcd_module
  ESP8266 with 3.5" KeDei LCD module
  ☆43Updated 8 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆22Updated 7 years ago
• todbot / crashspace-bigbutton
  ☆19Updated 8 years ago
• femtoduino / ArduinoCore-atsamd21e18a
  Arduino Core and Bootloader for the ATMEL SAM D21/R21 (E Variant) chips.
  ☆29Updated 5 years ago
• Integreight / 1Sheeld-Schematics-and-Board
  This repository contains the schematics, board and Fritzing part files for the 1Sheeld board.
  ☆42Updated 8 years ago
• matrix-io / matrixio_hal_esp32
  ESP32 HAL for MATRIX VOICE - https://www.matrix.one/products/voice
  ☆19Updated 4 years ago
• 1o1-Oscilloscope / Firmware
  Firmware for the One Inch Oscilloscope
  ☆29Updated 6 years ago
• kwnevarez / particle-device-locator
  ☆18Updated 8 years ago