TheThingsNetwork / kerlink-wirnet-firmwareLinks
Firmware and tools used to connect Kerlink Wirnet gateways to The Things Network Stack for LoRaWAN
☆20Updated 4 years ago
Alternatives and similar repositories for kerlink-wirnet-firmware
Users that are interested in kerlink-wirnet-firmware are comparing it to the libraries listed below
Sorting:
- Packet forwarder for Linux based gateways☆84Updated 7 years ago
- Multi protocol packet forwarder supporting the TTN gateway-connector protocol.☆87Updated 2 years ago
- Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.☆60Updated 7 years ago
- The Things Network Master Gateway Configurations☆93Updated 3 years ago
- Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.☆107Updated 7 years ago
- IBM LMIC v1.5 (LoRaWAN in C) adapted to run under the Arduino environment☆43Updated 8 years ago
- A LoRa packet forwarder running on the host of a LoRa Picocell Gateway that forwards RF packets receive by the concentrator to a server t…☆47Updated 6 years ago
- Reference setup for LoRaWAN Gateway based on a Raspberry Pi host and the Link Labs Gateway Board.☆28Updated 6 years ago
- RAKwireless,RAK811,BreakBoard,GPS tracker,Low power,Open source☆5Updated 3 years ago
- Embedded C library for The Things Gateway and Linux-based gateways to connect to The Things Network☆40Updated 7 years ago
- Port of LMIC-1.5 library tp Atmega 328 and ESP6822, including alternative AES encription library☆81Updated 8 years ago
- Documentation for The Things Network☆64Updated 11 months ago
- [OLD] LoRa Croft Gateway Server☆36Updated 9 years ago
- SX1301 Lora Concentrator Raspberry PI based gateway setup☆77Updated 3 years ago
- Raspberry PI iC880A and LinkLab Lora Gateway Shield☆71Updated 4 years ago
- ☆7Updated 4 years ago
- Decrypt LoRa payloads in python.☆70Updated 7 months ago
- LoRa Arduino shield source code☆28Updated 6 years ago
- Sketches for the NEXUS board for RFM95W (RFM92W, RFM98W)☆37Updated 8 years ago
- RFM92W/93W - Arduino Powered Low Power Long Range LoRa Transceiver☆26Updated 11 years ago
- ☆18Updated 8 years ago
- [OLD] Jolie, Croft, RabbitMQ and InfluxDB docker image☆12Updated 9 years ago
- ESP8266 WeMos Shield for Microchip LORAWAN RN2483 or RN2903☆39Updated 7 years ago
- ☆24Updated 5 years ago
- ☆36Updated 8 years ago
- Run lora_gateway and packet_forwarder on OpenWrt. http://www.semtech.com/wireless-rf/lora.html☆11Updated 9 years ago
- ☆32Updated 8 years ago
- This decoder can be used for all LoRa nodes which are built based on RUI.☆28Updated 4 years ago
- Application example to send both Sigfox and LoraWAN messages using Murata module☆11Updated 2 years ago
- ☆81Updated 4 years ago