kersing / packet_forwarder-OLD
A LoRa packet forwarder is a program running on the host of a LoRa gateway that forwards RF packets receive by the concentrator to a server through a IP/UDP link, and emits RF packets that are sent by the server.
☆10Updated 7 years ago
Alternatives and similar repositories for packet_forwarder-OLD:
Users that are interested in packet_forwarder-OLD are comparing it to the libraries listed below
- Packet forwarder for Linux based gateways☆84Updated 6 years ago
- Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.☆107Updated 7 years ago
- Firmware and tools used to connect Kerlink Wirnet gateways to The Things Network Stack for LoRaWAN☆20Updated 4 years ago
- Port of LMIC-1.5 library tp Atmega 328 and ESP6822, including alternative AES encription library☆81Updated 8 years ago
- Multi protocol packet forwarder supporting the TTN gateway-connector protocol.☆87Updated last year
- The Things Network Master Gateway Configurations☆93Updated 3 years ago
- A LoRa packet forwarder running on the host of a LoRa Picocell Gateway that forwards RF packets receive by the concentrator to a server t…☆47Updated 5 years ago
- Single Channel LoRaWAN Gateway☆235Updated 5 years ago
- Raspberry PI iC880A and LinkLab Lora Gateway Shield☆70Updated 4 years ago
- Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.☆59Updated 7 years ago
- Sketches for the NEXUS board for RFM95W (RFM92W, RFM98W)☆37Updated 8 years ago
- Host driver/HAL to build a LoRa Picocell Gateway which communicates through USB with a concentrator board based on Semtech SX1308 multi-c…☆45Updated 5 years ago
- IBM LMIC v1.5 (LoRaWAN in C) adapted to run under the Arduino environment☆43Updated 8 years ago
- ☆36Updated 7 years ago
- Reference setup for LoRaWAN Gateway based on a Raspberry Pi host and the Link Labs Gateway Board.☆28Updated 5 years ago
- Documentation for The Things Network☆64Updated 6 months ago
- Run lora_gateway and packet_forwarder on OpenWrt. http://www.semtech.com/wireless-rf/lora.html☆12Updated 9 years ago
- Workshops for The Things Network☆81Updated 3 years ago
- This is a python interface to the Semtech SX127x, HopeRF RFM9x, Microchip RN2483 long range, low power transceiver families.☆172Updated last week
- RFM92W/93W - Arduino Powered Low Power Long Range LoRa Transceiver☆26Updated 10 years ago
- Provides settings for TTN gateways that receive their settings automatically on start.☆51Updated last month
- Tutorial slides for the low-cost LoRa IoT platform☆113Updated 4 years ago
- Single Channel LoRaWAN Gateway☆66Updated 6 years ago
- Ansible playbook for setting up ChirpStack.☆84Updated last year
- Decrypt LoRa payloads in python.☆67Updated 2 months ago
- Arduino Library for TTN Devices☆209Updated 2 years ago
- LoRaMAC in C / LoRaWAN in C☆40Updated 7 years ago
- ☆7Updated 4 years ago