SuperMakeSomething / diy-3d-scannerLinks
MATLAB/Arduino code for DIY 3D Scanner Project featured in Super Make Something Episode 8
☆39Updated 2 years ago
Alternatives and similar repositories for diy-3d-scanner
Users that are interested in diy-3d-scanner are comparing it to the libraries listed below
Sorting:
- A CNC controller to use and test Grbl_ESP32☆79Updated 5 years ago
- Micro Robot Arm with ESP32 and 28BY-48 12V steppers☆82Updated 6 years ago
- ☆59Updated 4 years ago
- ☆67Updated 5 years ago
- ☆47Updated 7 years ago
- The library comes with AS5600. Through this library, we can realize read the angles 、get magnetic from a magnet underneath the sensor.☆119Updated 10 months ago
- uStepper Robot Arm STL files and instruction Revision 3☆93Updated 7 years ago
- ☆53Updated 2 years ago
- A standalone programmer for mass-programming AVR chips☆86Updated 4 years ago
- An Arduino library for the AS5600 magnetic encoder☆36Updated 3 years ago
- GUI for grbl.☆51Updated 8 years ago
- 2D actuator☆30Updated 6 years ago
- grbl 0.9i with Servo Motor support and CoreXY configuration Used For Crazy Engineer's Drawing Robot☆89Updated 6 years ago
- Arduino library for the cheap but decent 28BYJ-48 5v stepper motor with ULN2003 board☆126Updated 4 years ago
- 3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…☆83Updated 8 years ago
- ☆37Updated 2 years ago
- B-ROBOT Arduino self balancing robot from JJROBOTS.com☆114Updated 5 years ago
- Affordable and open-source LIDAR based on three VL53L0X ranging sensor.☆68Updated 7 years ago
- This is external programming for ESP32-Cam that you can simple attach it for easy upload your code to ESP32-Cam☆36Updated 3 years ago
- ☆83Updated 2 years ago
- Nextion Touch Screen => NodeJS => NanoDLP By Mango3D☆80Updated 6 years ago
- Better webUI for Smoothieware☆22Updated 8 years ago
- Simple RPM-Meter☆57Updated 2 years ago
- GRBL ported to ESP8266, using up to 8 axis. No arduino involved☆59Updated 6 months ago
- Asteroids and lasers - what could possibly go wrong...☆68Updated 2 years ago
- Arduino library supports many HC-SR04 sensors via I2C bus and hardware interrupt☆27Updated 8 years ago
- An Arduino 2.4GHz and IR remote controller with OLED display☆144Updated 4 years ago
- G-code enabled firmware for Robot Arms☆33Updated 3 years ago
- Neopixel Joints, millable on the Othermill☆27Updated 8 years ago
- Tool for Flashing ☒CC01 and ☒CR0x using ☒IP01☆103Updated 2 years ago