Alternatives and similar repositories for VC4CV

Users that are interested in VC4CV are comparing it to the libraries listed below

• antmicro / sdi-mipi-bridge-hw
  Antmicro's open hardware 3G SDI into MIPI CSI-2 converter
  ☆61Updated last year
• sonydevworld / spresense-hw-design-files
  HW design files for Spresense boards
  ☆39Updated last year
• pms67 / PiCNN
  Single-header, lightweight convolutional neural network library written in C++ for Raspberry Pis.
  ☆51Updated 7 years ago
• sonydevworld / spresense
  Spresense SDK source code
  ☆186Updated last month
• sonydevworld / spresense-arduino-compatible
  Spresense Arduino Library source code
  ☆76Updated last month
• sonydevworld / spresense-nuttx
  NuttX fork for Spresense
  ☆41Updated 3 years ago
• HiveTracker / firmware
  nRF52 code: handles LightHouse pulse signals measured with TS4231 + IMU
  ☆59Updated 5 years ago
• bitcraze / lighthouse-fpga
  ☆44Updated 2 years ago
• xmos / xcore_iot
  ☆37Updated last year
• PaulStoffregen / MotionCal
  Motion Sensor Calibration Tool
  ☆93Updated 5 years ago
• raspberrypi / raspiraw
  Example app directly receiving raw data from CSI2 sensors
  ☆271Updated last year
• ivmech / ivport-v2
  Raspberry Pi Camera Module V2 Multiplexer
  ☆42Updated 2 years ago
• slightlynybbled / libmathq15
  This is a library for Q1.15 math routines. These are intended for use on small embedded platforms, such as on 8- and 16-bit microcontrol…
  ☆32Updated 8 years ago
• csafonov / tinymc
  Tiny MATLAB-to-C converter (TMC Compiler)
  ☆13Updated 5 years ago
• wimrijnders / V3DLib
  C++ library for programming the VideoCore GPU on all Raspberry Pi's.
  ☆151Updated 2 years ago
• bqlabs / MotioSuit
  ☆41Updated 9 years ago
• antmicro / zynq-video-board
  Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.
  ☆63Updated 2 years ago
• osafune / max10-protoboard
  ☆11Updated 9 years ago
• kriswiner / LSM9DS1
  ST's new smaller, lower-power 9-axis motion sensor
  ☆41Updated 5 years ago
• realizator / stereopi-kicad-schematic
  StereoPi KiCad schematics
  ☆45Updated 6 years ago
• SanderVocke / picamgpu_minimal
  Minimal example of capturing YUV image data from the Pi camera into OpenGL textures using MMAL.
  ☆20Updated 10 years ago
• mahilab / Syntacts
  The Tactor Synthesizer
  ☆73Updated 3 years ago
• ni / usb3vision
  Driver for USB3 Vision(TM) class devices
  ☆74Updated 8 months ago
• sonydevworld / spresense-sketches
  Example code for Spresense Arduino development
  ☆15Updated 5 years ago
• bitbank2 / SLIC
  Simple lossless imaging codec
  ☆88Updated 3 years ago
• apertus-open-source-cinema / beta-hardware
  AXIOM Beta Hardware
  ☆62Updated 5 years ago
• arachnidlabs / mcp2210
  Python library for interfacing with the MCP2210 USB-SPI interface.
  ☆24Updated 5 years ago
• hideakitai / Packetizer
  binary data packetization encoder / decoder based on COBS / SLIP encoding
  ☆46Updated last year
• 6by9 / lens_shading
  Lens shading analysis tool
  ☆20Updated 4 years ago
• MariadeAnton / bcl
  Basic Compression Library in biicode http://bcl.comli.eu/
  ☆29Updated 10 years ago