Alternatives and similar repositories for StepServo

Users that are interested in StepServo are comparing it to the libraries listed below

• SZiv / RAMPSSB
  RAMPS Servo Board. Replaces the X and Y stepper drivers on a RAMPS CNC control board with two channel DC motor quadrature encoder control…
  ☆22Updated 7 years ago
• ottoragam / Brushed-DC-Servo-Drive
  Low cost servo drive for small CNC machinery
  ☆54Updated 8 years ago
• neuroprod / ClosedLoopDriver
  Arduino controler for a closed-loop stepper motor
  ☆88Updated 10 years ago
• uStepper / uStepper
  Repository for uStepper
  ☆99Updated 5 years ago
• ryannining / karyacontroller
  4 axis CNC, 3D, Laser Controller
  ☆61Updated 8 months ago
• uStepper / uStepperS
  ☆54Updated last year
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆92Updated 7 years ago
• DDeGonge / OpenBLDCServo
  Open Source Brushless DC Servo
  ☆13Updated 6 years ago
• gnea / grbl-LPC
  ☆75Updated 3 years ago
• SourceRabbit / gcode-sender
  Cross platform 3-Axis CNC Machines control software
  ☆80Updated 8 months ago
• bdring / 4_Axis_SPI_CNC
  4 Axis CNC Controller for Grbl_ESP32
  ☆66Updated 5 years ago
• imrahil / smoothieware-webui
  Better webUI for Smoothieware
  ☆22Updated 8 years ago
• danithebest91 / ServoStrap
  servo-controlled reprap 3D printer
  ☆98Updated 10 years ago
• bdring / Grbl_ESP32_Development_Controller
  A CNC controller to use and test Grbl_ESP32
  ☆77Updated 4 years ago
• buildbotics / bbctrl-pcb
  Buildbotics CNC, 3D printer and other machine controller
  ☆49Updated 3 years ago
• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆79Updated last year
• regeg / ArdunioTHC
  Arduino-based CNC Plasma torch system Torch Height Controller
  ☆81Updated 10 years ago
• ottoragam / Tarocco
  Closed Loop Motor Controller
  ☆134Updated 4 years ago
• hackaday3D / marlin_stm32
  stm32 for marlin 1.1.9
  ☆53Updated 5 years ago
• mcu51c51 / standaloneGRBL
  An open source, embedded, high performance CNC laser cutting and engraving controller written in optimized C that will run on a straight …
  ☆14Updated 7 years ago
• freakyattic / Firmware-LaserCutter-Marlin
  Marlin-based Laser Cutter/Engraver firmware for RepRap Hardware ( Marlin 1.0.0 )
  ☆29Updated 9 years ago
• kanestoboi / AS5600
  An Arduino library for the AS5600 magnetic encoder
  ☆35Updated 3 years ago
• cncgoko / Goko
  A desktop application for CNC milling controller running TinyG or Grbl
  ☆72Updated 6 years ago
• bdring / Grbl_ESP32_TMC2130_Plotter_Controller
  ☆66Updated 5 years ago
• beardface / Marlin-OpenSL
  Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
  ☆16Updated 11 years ago
• villamany / 3dpBurner-sender
  A GCODE sender for the 3dpBurner laser cutter/engraver (GRBL based)
  ☆36Updated 7 years ago
• adgaudio / dlp_printer
  Complete designs for a completely custom built Laser-SLA 3D printer. My own Mechanical Designs, Firmware, and Software.
  ☆30Updated 10 years ago
• bdring / Grbl_ESP32_MPCNC_Controller
  A Grbl_ESP32CNC Controller for MPCNC
  ☆88Updated 3 years ago
• synthetos / grblShield
  ☆136Updated 11 years ago
• Dark-Guan / Ananas
  This is an Arduino based program for step motor controller,Ananas.
  ☆51Updated 8 years ago