PedroCNeves / AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
☆36Updated 4 months ago
Alternatives and similar repositories for AC_ChargingStation:
Users that are interested in AC_ChargingStation are comparing it to the libraries listed below
- M5Stack Tough (ESP-32) Sailing Instruments Display and Autopilot Control☆105Updated last month
- Arduino UNO with Round LCD IPS Display☆63Updated 10 months ago
- Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy☆102Updated 7 months ago
- ☆29Updated 2 years ago
- This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…☆71Updated 7 months ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆31Updated last year
- 12V camper battery monitor with low energy bluetooth readout☆31Updated last year
- Using the LilyGo EPD 4.7" display to show OWM Weather Data☆59Updated 11 months ago
- ESP32 based CAN development board☆172Updated 2 years ago
- ☆32Updated 8 months ago
- Arduino firmware for DehneEVSE charging station☆59Updated 2 years ago
- Arduino Uno Code for EV Charger☆149Updated last year
- All the files and documents related to Overkill Solar BMSs, except the Arduino library, that has it's own repository.☆80Updated 10 months ago
- using an ESP32 or ESP8266 to create a smart thermostat☆133Updated 3 months ago
- Using the LilyGo EPD 4.7" display to show OWM Weather Data☆82Updated 11 months ago
- Arduino project to control webasto heater via W-bus☆42Updated 6 years ago
- A Firmware for the H32 board that allows to directly start using the board productively☆33Updated last year
- An Arduino M0 based controller for Webasto C/E Diesel Water Heaters☆51Updated 2 months ago
- ☆42Updated 3 years ago
- ☆122Updated last week
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆126Updated 3 years ago
- nmea2000 gateway with ESP32☆74Updated 3 weeks ago
- An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app - …☆59Updated 4 years ago
- Program for reading data from a Xiaoxiang smart BMS and printing to an OLED display☆20Updated 4 years ago
- OpenEVSE Hardware☆175Updated 3 weeks ago
- diyBMS v4 code for the ESP32 and new controller hardware☆202Updated this week
- Library for working with JBD BMS☆70Updated last year
- MPPT hardware which uses FUGU firmware☆19Updated 2 years ago
- Pitch and Roll indicator project using DFRobot Serial 6-Axis Accelerometer and 2x ESP32-S3-LCD-1.28 from Waveshare☆35Updated 8 months ago
- Send BMS' data over MQTT☆9Updated 3 years ago