OLIMEX / VGA2HDMI
VGA to HDMI converter
☆25Updated 8 months ago
Related projects ⓘ
Alternatives and complementary repositories for VGA2HDMI
- Code to support porting MiST cores to other boards.☆44Updated 3 weeks ago
- Hardware for MiSTeX☆64Updated 6 months ago
- A microprocessed RGB to HDMI Converter with USB capture☆82Updated 7 months ago
- Open Hardware RGB to Composite/S-Video Converter☆40Updated 3 years ago
- ☆26Updated 4 years ago
- ☆46Updated 2 years ago
- ZuluSCSI Pico - An Open Source Hardware SCSI emulator☆25Updated last year
- This is a modified version of the Graphics Gremlin ISA CGA/MDA graphics card to include a HDMI port.☆48Updated last week
- ☆36Updated 6 months ago
- Converts the output from an old TMS9928A Video Display Processor to drive a small TFT panel using either an SPI or a parallel interface. …☆25Updated last year
- Microcontroller firmware for retro FPGA support MCUs☆24Updated this week
- Hardware Repository for PiSCSI☆18Updated 7 months ago
- ROM emulator. Accepts ROM images through USB and acts as a parallel ROM chip.☆13Updated 10 months ago
- ☆12Updated 2 months ago
- Build a retro ISA or PC / 104 slot-based system on an ITX format board☆31Updated 3 years ago
- Experimenting with using Pico PIO as a 6502 Bus Interface☆14Updated 3 years ago
- Analog RGB 15Khz to VGA 31Khz in FGPA☆48Updated 8 years ago
- Cherry MX compatible upgrade for your Texas Instruments TI-99/4A Mitsumi mylar keyboard☆13Updated 7 months ago
- Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using☆13Updated 3 months ago
- Drop-In replacement for Dallas DS12887 RTC module☆41Updated 2 years ago
- Monotech XT-IDE Deluxe - Bootable ISA CF+IDE Interface☆27Updated last year
- Converts USB mice and USB keyboards to serial mice and XT-AT-PS/2 keyboards☆9Updated 4 months ago
- ISA 4Mb EMS expansion board☆27Updated this week
- Adapter for mounting a PC104 module onto an ISA card (for use with a 16bit backplane)☆12Updated last year
- 8bit ISA NE2000-compatible network card based on the RTL8019AS chip☆27Updated 2 years ago
- A Raspberry Pi Pico (RP2040) based Apple IIe expansion card with USB isolation.☆12Updated 3 years ago
- Amiga 2000 revision 6.2 motherboard re-done in KiCAD. WARNING: stability issue with Wicher 500i, could be noise related from accelerato…☆30Updated last year
- Bitbanged DVI and HDMI on the RP2040 Microcontroller☆23Updated last year
- Adapts standard PC floppy drives for use with IBM PS/2 computers that have 40 pin edge connectors☆34Updated 3 years ago
- PCB design for the pal dumper created by Charles MacDonald☆19Updated 7 years ago