erichelgeson / BlueSCSI-UpdaterLinks
Bootloader & Firmware Updater
☆19Updated 10 months ago
Alternatives and similar repositories for BlueSCSI-Updater
Users that are interested in BlueSCSI-Updater are comparing it to the libraries listed below
Sorting:
- A low-profile SCSI adapter from male 50-pin to male DB-25☆25Updated 3 years ago
- ☆32Updated 9 months ago
- This projects provides alternate firmware for A2VGA cards to add USB support to the Apple II. It currently supports a USB mouse and full…☆18Updated last year
- Apple II Peripheral Card that Interfaces to a ATMEGA328P for SD card storage☆25Updated last year
- An adapter to use an ATX power supply with a Mac IIci. Use at your own risk.☆10Updated last year
- A small SCSI device based on Teensy 3.5☆12Updated 10 months ago
- This is an Enhanced version of the 1581 Drive PCB.☆49Updated last year
- ISA 4Mb EMS expansion board☆36Updated 9 months ago
- ISA SCSI card with BIOS and spot of software SCSI emulation with STM32☆16Updated 3 years ago
- An hybrid Disk ][ and SmartPort controller☆51Updated last year
- The "horizontal" version of the WavetablePi☆12Updated 11 months ago
- An Apple Disk II controller clone using standard EPROMs☆56Updated 2 years ago
- Apple II/II+/IIe VGA card☆65Updated 2 years ago
- Various PCB and case designs of the SmartPortSD hard disk emulator for Apple II computers.☆49Updated 5 months ago
- ☆15Updated last year
- ☆34Updated this week
- Amiga 500 Custom Mechanical Keyboard☆40Updated 4 months ago
- 4MB RAM expansion for Atari 520ST(M)☆44Updated 3 years ago
- SRAM substitute for C64C shortboards☆60Updated 7 years ago
- A Gotek based compact PCB for Amiga☆45Updated last year
- An Apple II Language Card. Based on a design by iz8dwf☆35Updated last year
- ☆14Updated 5 months ago
- ∀2 Analog VGA card for the Apple II computer line☆32Updated last year
- An RGB adapter for TMS9928A and TMS9929A☆59Updated 5 years ago
- Connect USB keyboard and mouse to Atari ST using a Raspberry PI emulating the HD6301 keyboard controller☆10Updated 2 years ago
- HardMPU with wavetable module support☆25Updated 2 years ago
- DB19 3D printed Male & Female versions☆14Updated 2 years ago
- A ColecoVision clone☆18Updated 5 months ago
- Simple ATTiny85 based PS/2 to Amiga protocol converter that fits inside the keyboard.☆15Updated 3 years ago
- Open source clone of the Commodore 128 computer☆64Updated 3 months ago