Alternatives and similar repositories for RTD2662Board

Users that are interested in RTD2662Board are comparing it to the libraries listed below

• gamelaster / RTD2662
  Source codes, materials of LCD controller chip RTD2662/RTD2660
  ☆23Updated 7 years ago
• ghent360 / RTD-2660-Programmer
  Realtek RTD2660/2662 programmer
  ☆110Updated 7 years ago
• specadmin / RTD2660AVR
  RTD2660 LCD controller driver for AVR
  ☆52Updated 3 years ago
• floppes / RTD266xFlash
  ☆79Updated last year
• avtehnik / RTD2662
  source code for RTD2662
  ☆68Updated 9 years ago
• vd-rd / sbc_allwinner_a13
  Open hardware compute module with Allwinner A13 (ARM-A8 @1GHz), DDR3 (max 512MB) and expansions (USB, GPIO, WiFi, LCD, Audio)
  ☆24Updated 5 months ago
• ergoz / RTD2660_PCB800099
  RTD2660 RTD2662 Firmware pack [just as-is]
  ☆105Updated 7 years ago
• KerJoe / ORTD2662
  RTD2662 Custom firmware
  ☆18Updated 10 months ago
• wagiminator / ATtiny13-TinySolder
  T12 Quick Heating Soldering Station
  ☆86Updated 2 years ago
• phil-barrett / PicoCNC
  Raspberry Pi Pico based grblHAL Controller
  ☆150Updated last year
• benjlester / OpenHD-CM4-Carrier-Board
  [Shelved] RPI CM4 carrier for use in OpenHD
  ☆14Updated 3 years ago
• grafmar / Arduino-Reflow-Oven
  Control unit using Arduino to modify pizza oven to a reflow oven
  ☆21Updated last year
• wagiminator / CH32X035-USB-PD-Tester
  USB Power Delivery Testing Device and Variable Power Supply
  ☆142Updated 6 months ago
• c0d3z3r0 / aixun_t3a_rev
  AIXUN T3A Reverse Engineering
  ☆42Updated last year
• valerium-labs / RTD2660-TFT-controller-MINI-version
  ☆19Updated last year
• puzrin / dispenser
  SMT solder paste and flux dispenser
  ☆38Updated 4 years ago
• harlab / CM4_LCD_LT070ME05000
  Raspberry Pi CM4 bindings for JDI LT070ME05000 1200x1920 IPS display
  ☆76Updated 4 years ago
• devbisme / WireIt
  KiCad PCBNEW plugin that lets you add wires between pads on a PCB, delete them, and swap wires between pads.
  ☆86Updated 4 months ago
• watterott / HDMI-Adapter
  Universal HDMI/DVI Displays with Touch Panel for Raspberry Pi, BeagleBone, ODROID, UDOO...
  ☆72Updated 5 years ago
• VeryFastSnail / Quick861dw
  Repo for custom firmware for Quick 861DW hot air soldering station
  ☆24Updated 4 years ago
• ming-hai / PICkit3-Clone
  PICkit3 Clone Project - Layout, Schematic and Firmware
  ☆16Updated 9 years ago
• AlexKlimaj / BQ25703A_Module
  Buck boost regulator module that supports 3.5V-24V input, charging 1-4 cell batteries, and programmable USB OTG output from 4.48V to 20.8…
  ☆17Updated 5 years ago
• csurf / mstar
  ☆35Updated last year
• wntrblm / jellyfish-and-starfish
  ☆106Updated 2 years ago
• PTDreamer / stm32_soldering_iron_controller
  Custom firmware for the chinese ksger soldering iron controller
  ☆171Updated 5 years ago
• wagiminator / ATtiny814-USB-PD-Adapter
  USB Type-C Power Delivery Trigger and Monitoring Board
  ☆85Updated last year
• profdc9 / STM32surface
  STM32F103C8T6 bluepill like board with 0805 size and easily sourceable parts
  ☆26Updated 4 years ago
• Canonius / JBC_Soldering_Station
  Dual JBC T245 compatible 300W soldering station
  ☆63Updated 4 years ago
• spezifisch / T12PenSolder
  A better firmware for "Pen Solder V3" soldering irons with USB-C using Hakko T12 tips
  ☆25Updated last year
• tdjastrzebski / ICN6211-Configurator
  ICN6211 Configurator
  ☆39Updated 4 years ago