Alternatives and similar repositories for CheapRobotArm

Users that are interested in CheapRobotArm are comparing it to the libraries listed below

• 20sffactory / community_robot_arm
  Repository of Community Robot Arm Documents
  ☆197Updated 3 years ago
• ELISAVADevelopmentLab / MOTUS
  Open-Source 3D Printed Robot Arm with 6-DoF created by ELISAVA Development Lab
  ☆28Updated 3 years ago
• michaelkubina / SpotMicroESP32
  My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…
  ☆371Updated last year
• roTechnic / Robot-Arm
  ☆79Updated last year
• XRobots / ServoSmoothing
  ☆203Updated 4 years ago
• XRobots / GEDroid
  ☆56Updated last year
• CoyBeard / KUKA-KR350-Scale-Model
  One forth scale model of the KUKA KR350 model 3D printed and Arduino controlled.
  ☆52Updated 3 years ago
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆58Updated 3 years ago
• PCrnjak / CM6_COBOT_ROBOT
  Files and intro page for first version of CM6 COBOT robotic arm
  ☆224Updated last month
• Jerome-Graves / yertle
  A 3D Printed Quadrupedal Robot for Locomotion Research.
  ☆130Updated 3 years ago
• makerbase-mks / MKS-SERVO42C
  MKS SERVO42C, an upgraded version of MKS SERVO42B, built-in Field-Oriented control algorithm, position/speed/ torque closed-loop, 4 Half…
  ☆213Updated 3 years ago
• XRobots / CycloidalDrive
  ☆211Updated 2 years ago
• Ryan-Mirch / Aecerts_Hexapod_V1
  ☆170Updated last year
• KoshiroRobot / Ball-Balancing-Robot
  Ball Balance Robot Parts File and Program
  ☆223Updated last year
• cguweb-com / Arduino-Projects
  ☆151Updated last year
• aaedmusa / Internal-Cycloidal-Actuator
  ☆252Updated last year
• nikivanov / mural
  Mural - a low cost wall plotter
  ☆264Updated last month
• SovGVD / esp32-robot-dog-code
  WIP: ESP32 powered robot dog, quadruped robot. This is just code, hardware in the other repositories
  ☆140Updated 3 years ago
• chilipeppr / robot-actuator-esp32-v8
  This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.
  ☆232Updated 5 years ago
• 4ndreas / MantisRover
  CAD files for the Mantis Rover Project - 3D printed mecanum wheel rover.
  ☆17Updated 6 years ago
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆73Updated 4 years ago
• EricYufengWu / q8bot
  Q8 Robot
  ☆192Updated last week
• roTechnic / Cheats6DOFInverseKinematics
  Using IKPY to do Inverse kinematics for a 6DOF arm
  ☆46Updated 3 years ago
• byDagor / Dagor-Brushless-Controller
  The Dagor Controller is a fully integrated tiny solution for brushless-based actuators with wireless capabilities.
  ☆374Updated 6 months ago
• CGrassin / 3d_lidar
  This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.
  ☆77Updated 2 years ago
• DzymFardreamer / mks-servo-can
  ☆14Updated 11 months ago
• aaedmusa / 3D-Printed-Robot-Dog
  This is a 12 DOF 3D printed quadrupedal robot that I designed. It uses 12 servo motors, a Polulu maestro servo controller, and a Teensy 4…
  ☆88Updated 2 years ago
• mawildoer / cycloidal_generator
  A cycloidal reduction drive generator script for Fusion360
  ☆121Updated 5 years ago
• bikerglen / robot-arm-v01
  ☆58Updated 8 years ago
• SwannSchilling / Cycloidal-Drive
  3D Printed Gearbox
  ☆31Updated last year