MichaelRechtin / MotionSimLinks
☆78Updated 6 months ago
Alternatives and similar repositories for MotionSim
Users that are interested in MotionSim are comparing it to the libraries listed below
Sorting:
- Q8 Robot☆170Updated 2 weeks ago
- ☆59Updated 2 years ago
- This repository includes the code for the 3D Printed RC Excavator Project☆43Updated last year
- Mural - a low cost wall plotter☆209Updated this week
- This is a 3D Mouse project. Current version supports Fusion360 modeling.☆39Updated last year
- DIY WiFi Enabled Camera Slider using ESP32☆120Updated 4 months ago
- Artwork for the MiniHawk VTOL, a 3D-Printed Tricopter/Fixed-wing hybrid aircraft.☆240Updated 3 years ago
- ☆198Updated last year
- ☆140Updated 10 months ago
- Robak RC DIY car☆148Updated last year
- The MUB - An ultra-compact, modular processing unit☆62Updated 2 years ago
- ☆74Updated last year
- Ball Balance Robot Parts File and Program☆185Updated 8 months ago
- ☆555Updated 3 weeks ago
- Fiberpunk Holo from: https://github.com/peng-zhihui/HoloCubic☆111Updated 2 years ago
- 3D printed RC race car with custom electronics☆74Updated last month
- This is a 12 DOF 3D printed quadrupedal robot that I designed. It uses 12 servo motors, a Polulu maestro servo controller, and a Teensy 4…☆72Updated last year
- ☆154Updated 8 months ago
- esp32 cam digital low latency fpv☆135Updated 2 weeks ago
- TOPS (Traverser of Planar Surfaces) or "SPOT" backwards is a 3D printed Open Source quadrupedal robot☆270Updated last year
- A high-performance 6 Degrees of Freedom motion simulator platform powered by AC servo motors with AASD15A drivers☆303Updated 3 months ago
- Beam by Fiberpunk - ESP32☆72Updated 2 years ago
- Tools & Documentation relating to the Bambu Bus☆130Updated 5 months ago
- 1/28 scale rc car chassis☆82Updated 4 years ago
- with different defines_2-x.h for different board layouts :-) Compiles with Keil version 6☆109Updated last week
- CAN bus extruder, more resistant to noise,reduce a lot of wires for your 3D printer☆113Updated last year
- My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…☆345Updated 7 months ago
- ☆477Updated 11 months ago
- Theory and operation of the Powercore V1 EDM PSU☆47Updated last year
- CAD & Electronics for Powercore V1☆156Updated last year