Alternatives and similar repositories for AWG_DHO8-900

Users that are interested in AWG_DHO8-900 are comparing it to the libraries listed below

• Aylo6061 / PDHV
  ☆34Updated 2 years ago
• wntrblm / jellyfish-and-starfish
  ☆107Updated 2 years ago
• wagiminator / ATtiny814-USB-PD-Adapter
  USB Type-C Power Delivery Trigger and Monitoring Board
  ☆91Updated 2 years ago
• paulvee / VBA-Curve-Tracer
  This is a repository to hold files related to the VBA Curve Tracer project
  ☆77Updated 2 months ago
• Jana-Marie / analog-toolkit
  A smol and simple STM32G431 based Analog to USB toolkit.
  ☆67Updated last year
• wagiminator / ATtiny412-USB-Power-Isolator
  2.5kV Isolator for the USB Power Rail
  ☆51Updated 2 years ago
• openscopeproject / HP34401a-OLED-FW
  HP34401a DMM OLED display mod firmware
  ☆59Updated 4 months ago
• wagiminator / CH32X035-USB-PD-Tester
  USB Power Delivery Testing Device and Variable Power Supply
  ☆148Updated last month
• jjsch-dev / pico_i2c_sniffer
  i2c sniffer with a Raspberry Pi Pico
  ☆90Updated 4 years ago
• jaydcarlson / py32-template
  ☆89Updated last year
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆46Updated last year
• NNNILabs / Manhattan-Adapters-Prototyping-Ideas
  SMD adapters for Manhattan-style prototyping.
  ☆43Updated last year
• wagiminator / CH552-USB-OLED
  USB controlled I²C OLED
  ☆73Updated last year
• jmwilson / oshw-active-probe
  2GHz single-ended active probe design
  ☆140Updated last year
• testudor / modular-breadboard-base
  Breadboard base with attachment slots for various modules
  ☆36Updated 2 years ago
• wagiminator / ADuM3160-USB-Isolator
  2.5kV USB 2.0 Isolator with 200mA Power Supply and Full Speed (12Mbps) Support
  ☆64Updated 3 years ago
• wagiminator / CH32V003-FM-Transmitter
  Portable Digital Stereo FM Radio Transmitter
  ☆75Updated 11 months ago
• halfmarble / hm-panelizer
  a simple PCB panelizer
  ☆132Updated last year
• benedekkupper / stm32-i2c-hid
  HID over I2C demonstration
  ☆43Updated last month
• devbisme / WireIt
  KiCad PCBNEW plugin that lets you add wires between pads on a PCB, delete them, and swap wires between pads.
  ☆85Updated 7 months ago
• wagiminator / MCU-Flash-Tools
  Simple ISP Flash Tools for various Microcontrollers
  ☆102Updated 5 months ago
• xyphro / I3CBlaster
  Raspberry pico / RP2040 based USB to I3C converter with Python support
  ☆72Updated 2 months ago
• limingjie / CH32V003-ST7735-Driver
  A minimal ST7735 LCD driver for CH32V003
  ☆37Updated 2 years ago
• wagiminator / CH32X035-USB-PD-Adapter
  Portable Programmable Power Supply
  ☆60Updated 9 months ago
• DurandA / reflow946
  Bluetooth LE temperature controller for the 946C electronic hot plate
  ☆112Updated last year
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆59Updated 10 months ago
• robin7331 / pixel-pump-mainboard
  ☆48Updated 2 years ago
• Taoyukai / wch_kicad_library
  Kicad Library for ICs from WCH
  ☆26Updated 2 years ago
• openscopeproject / HP34401a-OLED-HW
  HP34401a DMM OLED display mod hardware
  ☆30Updated 6 years ago
• lucysrausch / jlcsmt-kicad-converter
  Converts kicad .csv BOM files to JLCSMT compatible BOM format.
  ☆51Updated 6 years ago