AndersBNielsen / PhaseLatchMiniLinks
High-rate continuous streaming of interleaved dual ADC (I/Q) samples over USB Full‑Speed (FS) using only the built‑in CDC class on an STM32F103C8 ("Blue Pill" style) board. Companion Python host tools provide live visualization, FIFO bridging, raw capture, diagnostics, and throughput benchmarking.
☆48Updated last month
Alternatives and similar repositories for PhaseLatchMini
Users that are interested in PhaseLatchMini are comparing it to the libraries listed below
Sorting:
- ☆34Updated 2 years ago
- An experimental GPSDO using an STM32 MCU and a u-blox Neo-M8 GNSS module.☆91Updated 3 years ago
- Embedded firmware for ham radio transceivers☆104Updated this week
- It started as some general experiments with RF stuff and gradually evolved into a (severely limited) spectrum analyzer.☆48Updated 6 years ago
- Firmware for EEZ Bench Box 3 (BB3)☆102Updated last year
- 2GHz single-ended active probe design☆162Updated last year
- 32-bit RISC-V MCU CH32X035 built-in USB PD PHY☆69Updated 2 months ago
- Bus Pirate Hardware and accessories for v5 and higher☆85Updated last month
- Main Probe Scope PCB Repo☆57Updated 6 years ago
- A collection of cool projects to make!☆180Updated 2 weeks ago
- 2.5kV Isolator for the USB Power Rail☆52Updated 3 years ago
- Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L …☆28Updated 2 years ago
- 5MHz to 2.1GHz RF Synthesizer with modulation capability☆56Updated 2 years ago
- OSHW DC power supply☆28Updated 4 years ago
- KiCad PCB project of Logic Analyzer☆44Updated 4 years ago
- CMSIS-DAP compliant debugging probe with SWD, JTAG, and VCP support☆39Updated 6 months ago
- LimeSDR Mini v2 Hardware Design☆40Updated 2 weeks ago
- CentSDR: tiny handheld standalone software defined receiver with LCD display.☆129Updated 4 years ago
- Open Source 250MHz Differential Oscilloscope Probe☆79Updated 3 years ago
- rogowski coil current probe☆203Updated 2 years ago
- Raspberry pico / RP2040 based USB to I3C converter with Python support☆74Updated last month
- A DIY, USB PD powered, pocket sized adjustable DC / lab bench power supply for electronic makers☆85Updated 6 months ago
- MAX2871 based RF Signal Generator in an Adafruit Feather Form Factor☆49Updated 5 years ago
- Si5351 lib for STM32☆64Updated 4 years ago
- Second version of my 1MHz to 6GHz USB based vector network analyzer☆16Updated 4 years ago
- 2.5kV USB 2.0 Isolator with 200mA Power Supply and Full Speed (12Mbps) Support☆66Updated 3 years ago
- RF Signal Generator with filtered outputs, modulation features☆16Updated 5 years ago
- HAL-based Si5351 driver for STM32☆82Updated 11 months ago
- HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…☆86Updated 2 years ago
- Software JTAG probe running on stm32f103.☆27Updated 5 years ago