ManoDaSilva / AGC_DSKY_ReplicaLinks
Mechanically accurate Apollo DSKY replica
☆30Updated 3 years ago
Alternatives and similar repositories for AGC_DSKY_Replica
Users that are interested in AGC_DSKY_Replica are comparing it to the libraries listed below
Sorting:
- Schematics and board layouts for an Apollo Guidance Computer replica☆109Updated 6 years ago
- SCTV scope clock code☆55Updated 2 years ago
- Project notes, tools and utilities for the HP4952A protocol analyzer☆26Updated 5 years ago
- Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display☆249Updated 5 years ago
- ☆30Updated 2 years ago
- Schematics of the SMART Response XE terminal☆49Updated 3 years ago
- A 555 timer simulator running on the ATTiny85 :)☆63Updated 3 years ago
- HP 4952A Open Source☆17Updated 6 years ago
- ☆74Updated 10 years ago
- arduino library to interface with 30-pin simm ram☆80Updated 10 years ago
- I/O Testing or PC program <=> Arduino communication☆31Updated 4 years ago
- Verilog simulation files for a replica of the Apollo Guidance Computer☆127Updated 3 years ago
- Arduino 6502 Controller☆70Updated 3 years ago
- Geoff's VT100 Terminal☆87Updated 2 years ago
- Open-Source firmware for the ZPB30A1 electronic load (WIP)☆51Updated 7 years ago
- Arduino library with LCD, Keyboard and SPI Flash support for the SMART Response XE classroom communicator☆99Updated 2 years ago
- Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet☆10Updated 3 years ago
- ☆62Updated 3 years ago
- A collection of scripts and tools for Atmel ATF150x and GAL Programmable logic devices, some of the only standing active 5V programmable …☆119Updated 3 months ago
- ☆25Updated 4 years ago
- Modern implementation of the AGC Monitor, for use with a real Apollo Guidance Computer☆26Updated 4 years ago
- A Multimeter Application. For nightly builds goto: https://gitlab.com/Sepps/app-121gw☆33Updated 7 years ago
- ☆43Updated 4 years ago
- Capture traffic on parallel printer port to USB☆86Updated last year
- A soldering station controller compatible with Weller RT tips☆43Updated 5 years ago
- Arabell300 is an Arduino-based 300 baud modem implementing Bell 103 and ITU V.21 standards. Features Hayes-compatible AT commands, AFSK…☆25Updated last month
- Ultimate Continuity tester☆30Updated 5 years ago
- An RCA COSMAC 1802 simulation for the Arduino mostly aimed at the KIM UNO hardware. Will work without it though.☆19Updated 2 years ago
- Software UART transmitter for AVR µCs which don't include an USART peripheral☆72Updated 3 years ago
- ☆121Updated 4 years ago